Merge pull request #17 from FabLab-Luenen/development

Bugfixes
2019-03-26 16:43:22 +01:00
parent a596203a6b 95475b2ddc
commit 2d17b93f29
5 changed files with 158 additions and 130 deletions
@@ -360,19 +360,26 @@ void initMqtt() {
  #else
    snprintf(mqtt_clientid, sizeof(mqtt_clientid), "%s", HOSTNAME);
  #endif
+  mqtt_clientid[sizeof(mqtt_clientid) - 1] = 0x00;
  snprintf(mqtt_will_topic, sizeof(mqtt_will_topic), "%s/config", HOSTNAME);
+  mqtt_will_topic[sizeof(mqtt_will_topic) - 1] = 0x00;
  snprintf(mqtt_intopic,  sizeof(mqtt_intopic),  "%s/in",  HOSTNAME);
+  mqtt_intopic[sizeof(mqtt_intopic) - 1] = 0x00;
  snprintf(mqtt_outtopic, sizeof(mqtt_outtopic), "%s/out", HOSTNAME);
+  mqtt_outtopic[sizeof(mqtt_outtopic) - 1] = 0x00;
  #if defined(MQTT_HOME_ASSISTANT_SUPPORT)
    snprintf(mqtt_ha_config, sizeof(mqtt_ha_config), "homeassistant/light/%s/config", HOSTNAME);
+    mqtt_ha_config[sizeof(mqtt_ha_config) - 1] = 0x00;
    snprintf(mqtt_ha_state_in,  sizeof(mqtt_ha_state_in),   "home/%s_ha/state/in",  HOSTNAME);
+    mqtt_ha_state_in[sizeof(mqtt_ha_state_in) - 1] = 0x00;
    snprintf(mqtt_ha_state_out, sizeof(mqtt_ha_state_out),  "home/%s_ha/state/out", HOSTNAME);
+    mqtt_ha_state_out[sizeof(mqtt_ha_state_out) - 1] = 0x00;
  #endif
  if ((strlen(mqtt_host) != 0) && (mqtt_port != 0)) {
    #if ENABLE_MQTT == 0
      DBG_OUTPUT_PORT.printf("MQTT active: %s:%d\r\n", mqtt_host, mqtt_port);
      mqtt_client->setServer(mqtt_host, mqtt_port);
-      mqtt_client->setCallback(mqtt_callback);
+      mqtt_client->setCallback(onMqttMessage);
    #endif
    #if ENABLE_MQTT == 1   
      DBG_OUTPUT_PORT.printf("AMQTT active: %s:%d\r\n", mqtt_host, mqtt_port);
@@ -451,11 +458,12 @@ void setup() {
  //Strip Config
  #if ENABLE_STATE_SAVE == 1
    (readConfigFS()) ? DBG_OUTPUT_PORT.println("WiFiManager config FS read success!"): DBG_OUTPUT_PORT.println("WiFiManager config FS Read failure!");
-    delay(500);
+    delay(250);
    (readStateFS()) ? DBG_OUTPUT_PORT.println("Strip state config FS read Success!") : DBG_OUTPUT_PORT.println("Strip state config FS read failure!");
  #endif
  #if ENABLE_STATE_SAVE == 0
    (setConfByConfString(readEEPROM(0, 222)))? DBG_OUTPUT_PORT.println("WiFiManager config EEPROM read success!"): DBG_OUTPUT_PORT.println("WiFiManager config EEPROM Read failure!");
+    delay(250);
    (setModeByStateString(readEEPROM(256, 66)))? DBG_OUTPUT_PORT.println("Strip state config EEPROM read Success!") : DBG_OUTPUT_PORT.println("Strip state config EEPROM read failure!");
  #endif
  char tmp_strip_size[6], tmp_fxoptions[5], tmp_rgbOrder[5]; //needed tempararily for WiFiManager Settings
@@ -562,7 +570,7 @@ void setup() {
        #else
          snprintf(last_conf, sizeof(last_conf), "CNF|%64s|%64s|%5d|%32s|%32s|%4d|%2d|%4s|%3d", HOSTNAME, "", "", "", "", WS2812FXStripSettings.stripSize, WS2812FXStripSettings.pin, WS2812FXStripSettings.RGBOrder, WS2812FXStripSettings.fxoptions);
        #endif
-        last_conf[sizeof(last_conf)]=0;
+        last_conf[sizeof(last_conf)] = 0x00;
        writeEEPROM(0, 222, last_conf);
        EEPROM.commit();
        shouldSaveConfig = false;
@@ -677,6 +685,7 @@ void setup() {
  #if defined(ENABLE_REMOTE)
    irrecv.enableIRIn();  // Start the receiver
    snprintf(last_state, sizeof(last_state), "STA|%2d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d", mode, ws2812fx_mode, ws2812fx_speed, brightness, main_color.red, main_color.green, main_color.blue, main_color.white, back_color.red, back_color.green, back_color.blue, back_color.white, xtra_color.red, xtra_color.green, xtra_color.blue,xtra_color.white);
+    last_state[sizeof(last_state)]= 0x00;
  #endif
  DBG_OUTPUT_PORT.println("finished Main Setup!");

@@ -865,6 +874,7 @@ void loop() {
        if(!settings_save_state.active()) settings_save_state.once(3, tickerSaveState);
      #endif
      snprintf(last_state, sizeof(last_state), "STA|%2d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d", prevmode, ws2812fx_mode, ws2812fx_speed, brightness, main_color.red, main_color.green, main_color.blue, main_color.white, back_color.red, back_color.green, back_color.blue, back_color.white, xtra_color.red, xtra_color.green, xtra_color.blue, xtra_color.white);
+      last_state[sizeof(last_state) - 1] = 0x00;
    }
    #if defined(ENABLE_MQTT)
      #if ENABLE_MQTT == 0
@@ -58,6 +58,8 @@ void convertColors() {
 }

 void getArgs() {
+  
+  if (mode == SET_ALL || mode == SET_MODE || mode == SET_COLOR) {
    if (server.arg("rgb") != "") {
      uint32_t rgb = (uint32_t) strtoul(server.arg("rgb").c_str(), NULL, 16);
      main_color.white = ((rgb >> 24) & 0xFF);
@@ -86,7 +88,7 @@ void getArgs() {
      back_color.blue = ((rgb2 >> 0) & 0xFF);
    } else {
      if ((server.arg("r2") != "") && (server.arg("r2").toInt() >= 0) && (server.arg("r2").toInt() <= 255)) { 
-      back_color.red = constrain(server.arg("r2").toInt(), 0, 255);
+        back_color.red = server.arg("r2").toInt();
      }
      if ((server.arg("g2") != "") && (server.arg("g2").toInt() >= 0) && (server.arg("g2").toInt() <= 255)) {
        back_color.green = server.arg("g2").toInt();
@@ -118,20 +120,6 @@ void getArgs() {
        xtra_color.white = server.arg("w3").toInt();
      }
    }
-  if ((server.arg("s") != "") && (server.arg("s").toInt() >= 0) && (server.arg("s").toInt() <= 255)) {
-  ws2812fx_speed = constrain(server.arg("s").toInt(), 0, 255);
-  }
-
-  if ((server.arg("m") != "") && (server.arg("m").toInt() >= 0) && (server.arg("m").toInt() <= strip->getModeCount())) {
-    ws2812fx_mode = constrain(server.arg("m").toInt(), 0, strip->getModeCount() - 1);
-  }
-
-  if ((server.arg("c") != "") && (server.arg("c").toInt() >= 0) && (server.arg("c").toInt() <= 100)) {
-    brightness = constrain((int) server.arg("c").toInt() * 2.55, 0, 255);
-  } else if ((server.arg("p") != "") && (server.arg("p").toInt() >= 0) && (server.arg("p").toInt() <= 255)) {
-    brightness = constrain(server.arg("p").toInt(), 0, 255);
-  }
-
    main_color.red = constrain(main_color.red, 0, 255);
    main_color.green = constrain(main_color.green, 0, 255);
    main_color.blue = constrain(main_color.blue, 0, 255);
@@ -145,10 +133,27 @@ void getArgs() {
    xtra_color.blue = constrain(xtra_color.blue, 0, 255);
    xtra_color.white = constrain(xtra_color.white, 0, 255);
    convertColors();
-  DBG_OUTPUT_PORT.print("Get Args: ");
-  DBG_OUTPUT_PORT.println(listStatusJSON());
+  }
+  if (mode == SET_ALL || mode == SET_MODE || mode == SET_SPEED || mode == TV) {
+    if ((server.arg("s") != "") && (server.arg("s").toInt() >= 0) && (server.arg("s").toInt() <= 255)) {
+    ws2812fx_speed = constrain(server.arg("s").toInt(), 0, 255);
+    }
+  }
+  if (mode == SET_ALL || mode == SET_MODE) {
+    if ((server.arg("m") != "") && (server.arg("m").toInt() >= 0) && (server.arg("m").toInt() <= strip->getModeCount())) {
+      ws2812fx_mode = constrain(server.arg("m").toInt(), 0, strip->getModeCount() - 1);
+    }
+  }
+  if (mode == SET_ALL || mode == SET_MODE || mode == SET_BRIGHTNESS || mode == AUTO || mode == TV || mode == E131) {
+    if ((server.arg("c") != "") && (server.arg("c").toInt() >= 0) && (server.arg("c").toInt() <= 100)) {
+      brightness = constrain((int) server.arg("c").toInt() * 2.55, 0, 255);
+    } else if ((server.arg("p") != "") && (server.arg("p").toInt() >= 0) && (server.arg("p").toInt() <= 255)) {
+      brightness = constrain(server.arg("p").toInt(), 0, 255);
+    }
  }
  
+  DBG_OUTPUT_PORT.printf("Get Args: %s\r\n", listStatusJSON());
+}

 uint16_t convertSpeed(uint8_t mcl_speed) {
  //long ws2812_speed = mcl_speed * 256;
@@ -284,6 +289,7 @@ void handleRangeDifferentColors(uint8_t * mypayload) {
    while ( rangebegin <= rangeend ) {
      char rangeData[11];
      snprintf(rangeData, sizeof(rangeData), "%02d%s", rangebegin, colorval);
+      rangeData[sizeof(rangeData) - 1] = 0x00;
      // Set one LED
      handleSetSingleLED((uint8_t*) rangeData, 0);
      rangebegin++;
@@ -663,10 +669,7 @@ void getModesJSON() {
 // HTTP request handlers
 // ***************************************************************************
 void handleMinimalUpload() {
-  char temp[1500];
-
-  snprintf ( temp, 1500,
-   "<!DOCTYPE html>\
+  char message[] = "<!DOCTYPE html>\
    <html>\
      <head>\
        <title>ESP8266 Upload</title>\
@@ -681,10 +684,9 @@ void handleMinimalUpload() {
          <button>Upload</button>\
         </form>\
      </body>\
-    </html>"
-  );
+    </html>";
  server.sendHeader("Access-Control-Allow-Origin", "*");
-  server.send ( 200, "text/html", temp );
+  server.send ( 200, "text/html", message );
 }

 void handleNotFound() {
@@ -872,8 +874,8 @@ void checkpayload(uint8_t * payload, bool mqtt = false, uint8_t num = 0) {
    #if !defined(USE_WS2812FX_DMA)
      if (payload[2] == 'p') {
        char tmp_pin[3];
-        tmp_pin[2] = 0x00;
        snprintf(tmp_pin, sizeof(tmp_pin), "%s", &payload[3]);
+        tmp_pin[2] = 0x00;
        checkPin(atoi(tmp_pin));
        updateStrip = true;
        updateConf = true;
@@ -892,26 +894,31 @@ void checkpayload(uint8_t * payload, bool mqtt = false, uint8_t num = 0) {
    }
    if (payload[1] == 'h') {
      snprintf(HOSTNAME, sizeof(HOSTNAME), "%s", &payload[2]);
+      HOSTNAME[sizeof(HOSTNAME) - 1] = 0x00;
      updateConf = true;
    }
  #if defined(ENABLE_MQTT)
    if (payload[1] == 'm') {
      if (payload[2] == 'h') {
        snprintf(mqtt_host, sizeof(mqtt_host), "%s", &payload[3]);
+        mqtt_host[sizeof(mqtt_host) - 1] = 0x00;
        updateConf = true;
      }
      if (payload[2] == 'p') {
        char tmp_port[6];
        snprintf(tmp_port, sizeof(tmp_port), "%s", &payload[3]);
+        tmp_port[sizeof(tmp_port) - 1] = 0x00;
        mqtt_port = constrain(atoi(tmp_port), 0, 65535);
        updateConf = true;
      }
      if (payload[2] == 'u') {
        snprintf(mqtt_user, sizeof(mqtt_user), "%s", &payload[3]);
+        mqtt_user[sizeof(mqtt_user) - 1] = 0x00;
        updateConf = true;
      }
      if (payload[2] == 'w') {
        snprintf(mqtt_pass, sizeof(mqtt_pass), "%s", &payload[3]);
+        mqtt_pass[sizeof(mqtt_pass) - 1] = 0x00;
        updateConf = true;
      }    
    }
@@ -1254,23 +1261,17 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
    }
  #endif

-  #if ENABLE_MQTT == 1
-    void onMqttMessage(char* topic, char* payload_in, AsyncMqttClientMessageProperties properties, size_t length, size_t index, size_t total) {
-    DBG_OUTPUT_PORT.print("MQTT: Recieved ["); DBG_OUTPUT_PORT.print(topic);
-//    DBG_OUTPUT_PORT.print("]: "); DBG_OUTPUT_PORT.println(payload_in);
-    uint8_t * payload = (uint8_t *) malloc(length + 1);
-    memcpy(payload, payload_in, length);
-    payload[length] = 0;
-    DBG_OUTPUT_PORT.printf("]: %s\r\n", payload);
+  #if ENABLE_MQTT == 0
+  void onMqttMessage(char* topic, byte* payload_in, uint16_t length) {
  #endif
  
-  #if ENABLE_MQTT == 0
-  void mqtt_callback(char* topic, byte* payload_in, uint16_t length) {
+  #if ENABLE_MQTT == 1
+  void onMqttMessage(char* topic, char* payload_in, AsyncMqttClientMessageProperties properties, size_t length, size_t index, size_t total) {
+  #endif
    uint8_t * payload = (uint8_t *) malloc(length + 1);
    memcpy(payload, payload_in, length);
    payload[length] = 0;
-    DBG_OUTPUT_PORT.printf("MQTT: Message arrived [%s]\r\n", payload);
-  #endif
+    DBG_OUTPUT_PORT.printf("MQTT: Recieved [%s]: %s\r\n", topic, payload);
 
    #if defined(ENABLE_HOMEASSISTANT)
      if (strcmp(topic, mqtt_ha_state_in) == 0) {
@@ -1503,6 +1504,7 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
    DBG_OUTPUT_PORT.printf("Short button press\r\n");
    if (mode == OFF) {
      setModeByStateString(BTN_MODE_SHORT);
+      prevmode = mode;
      mode = SET_ALL;
    } else {
      mode = OFF;
@@ -1513,6 +1515,7 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
  void mediumKeyPress() {
    DBG_OUTPUT_PORT.printf("Medium button press\r\n");
    setModeByStateString(BTN_MODE_MEDIUM);
+    prevmode = mode;
    mode = SET_ALL;
  }

@@ -1520,6 +1523,7 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
  void longKeyPress() {
    DBG_OUTPUT_PORT.printf("Long button press\r\n");
    setModeByStateString(BTN_MODE_LONG);
+    prevmode = mode;
    mode = SET_ALL;
  }

@@ -1557,8 +1561,6 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
 #if defined(ENABLE_BUTTON_GY33)
  void shortKeyPress_gy33() {
    DBG_OUTPUT_PORT.printf("Short GY-33 button press\r\n");
-//    tcs.setConfig(MCU_LED_04, MCU_WHITE_OFF);
-//    delay(500);
    uint16_t red, green, blue, cl, ct, lux;
    tcs.getRawData(&red, &green, &blue, &cl, &lux, &ct);
    DBG_OUTPUT_PORT.printf("Raw Colors: R: [%d] G: [%d] B: [%d] Clear: [%d] Lux: [%d] Colortemp: [%d]\r\n", (int)red, (int)green, (int)blue, (int)cl, (int)lux, (int)ct);
@@ -1566,14 +1568,14 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
    tcs.getData(&r, &g, &b, &col, &conf);
    DBG_OUTPUT_PORT.printf("Colors: R: [%d] G: [%d] B: [%d] Color: [%d] Conf: [%d]\r\n", (int)r, (int)g, (int)b, (int)col, (int)conf);
    main_color.red = (pow((r/255.0), 2.5)*255); main_color.green = (pow((g/255.0), 2.5)*255); main_color.blue = (pow((b/255.0), 2.5)*255);main_color.white = 0; 
-    ws2812fx_mode = 0;
+    ws2812fx_mode = FX_MODE_STATIC;
+    prevmode = HOLD;
    mode = SET_ALL;
-//    tcs.setConfig(MCU_LED_OFF, MCU_WHITE_OFF);
  }

  // called when button is kept pressed for less than 2 seconds
  void mediumKeyPress_gy33() {   
-      tcs.setConfig(MCU_LED_06, MCU_WHITE_OFF);
+      tcs.setConfig(MCU_LED_03, MCU_WHITE_OFF);
  }

  // called when button is kept pressed for 2 seconds or more
@@ -193,28 +193,30 @@
  });

  server.on("/set_brightness", []() {
-    getArgs();
    mode = SET_BRIGHTNESS;
+    getArgs();   
    getStatusJSON();
  });

  server.on("/get_brightness", []() {
    char str_brightness[4];
    snprintf(str_brightness, sizeof(str_brightness), "%i", (int) (brightness / 2.55));
+    str_brightness[sizeof(str_brightness) - 1] = 0x00;
    server.sendHeader("Access-Control-Allow-Origin", "*");
    server.send(200, "text/plain", str_brightness );
    DBG_OUTPUT_PORT.printf("/get_brightness: %i\r\n", (int) (brightness / 2.55));
  });

  server.on("/set_speed", []() {
-    getArgs();
    mode = SET_SPEED;
+    getArgs();
    getStatusJSON();
  });

  server.on("/get_speed", []() {
    char str_speed[4];
    snprintf(str_speed, sizeof(str_speed), "%i", ws2812fx_speed);
+    str_speed[sizeof(str_speed) - 1] = 0x00;
    server.sendHeader("Access-Control-Allow-Origin", "*");
    server.send(200, "text/plain", str_speed );
    DBG_OUTPUT_PORT.printf("/get_speed: %i\r\n", ws2812fx_speed);
@@ -229,6 +231,7 @@
  server.on("/get_color", []() {
    char rgbcolor[10];
    snprintf(rgbcolor, sizeof(rgbcolor), "%02X%02X%02X%02X", main_color.white, main_color.red, main_color.green, main_color.blue);
+    rgbcolor[sizeof(rgbcolor) - 1] = 0x00;
    server.sendHeader("Access-Control-Allow-Origin", "*");
    server.send(200, "text/plain", rgbcolor );
    DBG_OUTPUT_PORT.print("/get_color: ");
@@ -238,6 +241,7 @@
  server.on("/get_color2", []() {
    char rgbcolor[10];
    snprintf(rgbcolor, sizeof(rgbcolor), "%02X%02X%02X%02X", back_color.white, back_color.red, back_color.green, back_color.blue);
+    rgbcolor[sizeof(rgbcolor) - 1] = 0x00;
    server.sendHeader("Access-Control-Allow-Origin", "*");
    server.send(200, "text/plain", rgbcolor );
    DBG_OUTPUT_PORT.print("/get_color2: ");
@@ -247,6 +251,7 @@
  server.on("/get_color3", []() {
    char rgbcolor[10];
    snprintf(rgbcolor, sizeof(rgbcolor), "%02X%02X%02X%02X", xtra_color.white, xtra_color.red, xtra_color.green, xtra_color.blue);
+    rgbcolor[sizeof(rgbcolor) - 1] = 0x00;
    server.sendHeader("Access-Control-Allow-Origin", "*");
    server.send(200, "text/plain", rgbcolor );
    DBG_OUTPUT_PORT.print("/get_color3: ");
@@ -285,6 +290,7 @@
    if(server.hasArg("ws_rgbo")){
      char tmp_rgbOrder[5];
      snprintf(tmp_rgbOrder, sizeof(tmp_rgbOrder), "%s", server.arg("ws_rgbo").c_str());
+      tmp_rgbOrder[sizeof(tmp_rgbOrder) - 1] = 0x00;
      checkRGBOrder(tmp_rgbOrder);
      updateStrip = true;
      updateConf = true;
@@ -312,12 +318,14 @@
    
    if(server.hasArg("hostname")){
      snprintf(HOSTNAME, sizeof(HOSTNAME), "%s", server.arg("hostname").c_str());
+      HOSTNAME[sizeof(HOSTNAME) - 1] = 0x00;
      updateConf = true;
    }
    
 #if defined(ENABLE_MQTT)   
    if(server.hasArg("mqtt_host")){
      snprintf(mqtt_host, sizeof(mqtt_host), "%s", server.arg("mqtt_host").c_str());
+      mqtt_host[sizeof(mqtt_host) - 1] = 0x00;
      updateConf = true;
    }
    if(server.hasArg("mqtt_port")){
@@ -328,10 +336,12 @@
    }
    if(server.hasArg("mqtt_user")){
      snprintf(mqtt_user, sizeof(mqtt_user), "%s", server.arg("mqtt_user").c_str());
+      mqtt_user[sizeof(mqtt_user) - 1] = 0x00;
      updateConf = true;
    }
    if(server.hasArg("mqtt_pass")){
      snprintf(mqtt_pass, sizeof(mqtt_pass), "%s", server.arg("mqtt_pass").c_str());
+      mqtt_pass[sizeof(mqtt_pass) - 1] = 0x00;
      updateConf = true;
    }
    if (updateConf) {
@@ -347,7 +357,6 @@
    updateStrip = false;
    updateConf = false;
    getConfigJSON();
-    delay(500);
  });
  
  server.on("/off", []() {
@@ -357,56 +366,57 @@

    server.on("/auto", []() {
    mode = AUTO;
+    getArgs();
    getStatusJSON();
  });

  server.on("/all", []() {
-    getArgs();
    ws2812fx_mode = FX_MODE_STATIC;
    mode = SET_ALL;
+    getArgs();
    getStatusJSON();
  });

  #if defined(ENABLE_LEGACY_ANIMATIONS)
    server.on("/wipe", []() {
-      getArgs();
      ws2812fx_mode = FX_MODE_COLOR_WIPE;
      mode = SET_ALL;
+      getArgs();
      getStatusJSON();
    });
  
    server.on("/rainbow", []() {
-      getArgs();
      ws2812fx_mode = FX_MODE_RAINBOW;
      mode = SET_ALL;
+      getArgs();
      getStatusJSON();
    });
  
    server.on("/rainbowcycle", []() {
-      getArgs();
      ws2812fx_mode = FX_MODE_RAINBOW_CYCLE;
      mode = SET_ALL;
+      getArgs();
      getStatusJSON();
    });
  
    server.on("/theaterchase", []() {
-      getArgs();
      ws2812fx_mode = FX_MODE_THEATER_CHASE;
      mode = SET_ALL;
+      getArgs();
      getStatusJSON();
    });
  
    server.on("/twinklerandom", []() {
-      getArgs();
      ws2812fx_mode = FX_MODE_TWINKLE_RANDOM;
      mode = SET_ALL;
+      getArgs();
      getStatusJSON();
    });
    
    server.on("/theaterchaserainbow", []() {
-      getArgs();
      ws2812fx_mode = FX_MODE_THEATER_CHASE_RAINBOW;
      mode = SET_ALL;
+      getArgs();
      getStatusJSON();
    });
  #endif
@@ -414,6 +424,7 @@
  #if defined(ENABLE_E131)
    server.on("/e131", []() {
      mode = E131;
+      getArgs();
      getStatusJSON();
    });
  #endif
@@ -421,6 +432,7 @@
  #if defined(ENABLE_TV)
    server.on("/tv", []() {
      mode = TV;
+      getArgs();
      getStatusJSON();
    });
  #endif
@@ -430,7 +442,7 @@
  });

  server.on("/set_mode", []() {
-    getArgs();
    mode = SET_MODE;
+    getArgs();
    getStatusJSON();
  });
@@ -146,4 +146,7 @@
 * added pointer for MQTT again
 * Removed some String datatype and replaced with char array
 * better responsiveness in ui for sliders
+ *
+ * 26 Mar 2019
+ * Bugfixes
  */
@@ -35,8 +35,8 @@ arduino_core_2_5_0 = espressif8266@2.0.4
 arduino_core_stage = https://github.com/platformio/platform-espressif8266.git#feature/stage

 framework = arduino
-platform = ${common.arduino_core_2_4_2}
-; platform = ${common.arduino_core_2_5_0}
+;platform = ${common.arduino_core_2_4_2}
+platform = ${common.arduino_core_2_5_0}
 build_flags =
  -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH
  -DMQTT_MAX_PACKET_SIZE=512 ; PubSubClient Specific flags
@@ -74,9 +74,10 @@ lib_deps = ${common.lib_deps}
 board = nodemcuv2
 framework = ${common.framework}
 platform = ${common.platform}
+board_build.f_cpu = 160000000L
 build_flags = 
  ${common.build_flags}
-  ; -Wl,-Teagle.flash.4m3m.ld  ;;;; Required for core > v2.5.0 or staging version
+  -Wl,-Teagle.flash.4m3m.ld  ; Required for core > v2.5.0 or staging version
 monitor_speed = ${common.monitor_speed}
 upload_speed = ${common.upload_speed}
 upload_resetmethod = ${common.upload_resetmethod}