Version Bump to 3.1.0

* bugfixes
 * E1.31 is now working for multi segments

Arduino/McLighting/McLighting.ino

@@ -718,14 +718,12 @@ void loop() {
   if ((State.mode == HOLD) || ((State.mode == OFF) && (strip->getBrightness() > 0) && Config.transEffect)) {
     if(!strip->isRunning()) strip->start();
     strip->service();
+    bool playE131 = false;
     for (uint8_t i = 0; i < Config.segments; i++) {
       if (segState.mode[i] == FX_MODE_CUSTOM_0) { handleAutoPlay(i); }
-      if (segState.mode[i] == FX_MODE_CUSTOM_3) {
+      if (segState.mode[i] == FX_MODE_CUSTOM_3) { playE131 = true; }
-        if (strip->getSpeed(i) > SPEED_MIN) {
-          strip->setSpeed(i, SPEED_MIN);
-        }
-      }
     }
+    if (playE131 == true) { handleE131Play(); }
   }
 
   if (prevmode != State.mode) {

Arduino/McLighting/WS2812FX.cpp

@@ -781,7 +781,7 @@ uint16_t WS2812FX::scan(uint32_t color1, uint32_t color2, bool dual) {
 
   SEGMENT_RUNTIME.counter_mode_step += dir;
   if(SEGMENT_RUNTIME.counter_mode_step == 0) SEGMENT_RUNTIME.aux_param = 0;
-  if(SEGMENT_RUNTIME.counter_mode_step >= (SEGMENT_LENGTH - size)) SEGMENT_RUNTIME.aux_param = 1;
+  if(SEGMENT_RUNTIME.counter_mode_step >= (uint16_t)(SEGMENT_LENGTH - size)) SEGMENT_RUNTIME.aux_param = 1;
 
   return (SEGMENT.speed / (SEGMENT_LENGTH * 2));
 }
@@ -1388,7 +1388,7 @@ uint16_t WS2812FX::mode_larson_scanner(void) {
   else CLR_CYCLE;
 
   SEGMENT_RUNTIME.counter_mode_step++;
-  if(SEGMENT_RUNTIME.counter_mode_step >= ((SEGMENT_LENGTH * 2) - 2)) {
+  if(SEGMENT_RUNTIME.counter_mode_step >= (uint16_t)((SEGMENT_LENGTH * 2) - 2)) {
     SEGMENT_RUNTIME.counter_mode_step = 0;
   }
 
@@ -1630,7 +1630,7 @@ uint8_t WS2812FX::setCustomMode(const __FlashStringHelper* name, uint16_t (*p)()
 }
 
 uint8_t WS2812FX::setCustomMode(uint8_t index, const __FlashStringHelper* name, uint16_t (*p)()) {
-  if((FX_MODE_CUSTOM_0 + index) < MODE_COUNT) {
+  if((uint8_t)(FX_MODE_CUSTOM_0 + index) < MODE_COUNT) {
     _names[FX_MODE_CUSTOM_0 + index] = name; // store the custom mode name
     customModes[index] = p; // store the custom mode
 

Arduino/McLighting/WS2812FX.h

@@ -65,7 +65,7 @@
 #define MAX_CUSTOM_MODES  10
 #define SEGMENT          _segments[_segment_index]
 #define SEGMENT_RUNTIME  _segment_runtimes[_segment_index]
-#define SEGMENT_LENGTH   (SEGMENT.stop - SEGMENT.start + 1)
+#define SEGMENT_LENGTH   (uint16_t)(SEGMENT.stop - SEGMENT.start + 1)
 
 // some common colors
 #define RED        (uint32_t)0xFF0000

Arduino/McLighting/definitions.h

@@ -1,4 +1,4 @@
-#define USE_WS2812FX_DMA 0      // 0 = Used PIN is ignored & set to RX/GPIO3; 1 = Used PIN is ignored & set to TX/GPIO1; 2 = Uses PIN is ignored & set to D4/GPIO2;  Uses WS2812FX, see: https://github.com/kitesurfer1404/WS2812FX
+#define USE_WS2812FX_DMA 0      // 0 = Used PIN is ignored & set to RX/GPIO3; 1 = Used PIN is ignored & set to TX/GPIO1; 2 = Used PIN is ignored & set to D4/GPIO2;  Uses WS2812FX, see: https://github.com/kitesurfer1404/WS2812FX
                                 // or comment it out
 #if defined(USE_WS2812FX_DMA)
   #define MAXLEDS 384           // due to memory limit of esp8266 at the moment only 384 leds are supported in DMA Mode. More can crash if mqtt is used.
@@ -22,13 +22,13 @@ char HOSTNAME[65] = "McLightingRGBW"; // Friedly hostname  is configurable just
 #define MQTT_HOME_ASSISTANT_SUPPORT   // If defined, use AMQTT and select Tools -> IwIP Variant -> Higher Bandwidth
 //#define DISABLE_MQTT_OUT_ON_MQTT_IN   // If defined, McLighting will not send back MQTT-out on MQTT-in regarding issue #67, does not change anything at the moment
 
-#define ENABLE_BUTTON 14              // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control, the value defines the input pin (14 / D5) for switching the LED strip on / off, connect this PIN to ground to trigger button.
+//#define ENABLE_BUTTON 14              // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control, the value defines the input pin (14 / D5) for switching the LED strip on / off, connect this PIN to ground to trigger button.
 //#define ENABLE_BUTTON_GY33 12         // If defined, enable button handling code for GY-33 color sensor to scan color. The value defines the input pin (12 / D6) for read color data with RGB sensor, connect this PIN to ground to trigger button.
 //#define POWER_SUPPLY 12               // PIN (12 / D6) If defined, enable output to control external power supply
 #if defined(POWER_SUPPLY)
   #define POWER_ON   HIGH           // Define the output state to turn on the power supply, either HIGH or LOW.  Opposite will be uses for power off.
 #endif
-//#define ENABLE_REMOTE 13              // If defined, enable Remote Control via TSOP31238. The value defines the input pin (13 / D7) for TSOP31238 Out
+#define ENABLE_REMOTE 13              // If defined, enable Remote Control via TSOP31238. The value defines the input pin (13 / D7) for TSOP31238 Out
 
 #if defined(ENABLE_BUTTON_GY33)
   #define GAMMA 2.5                   // Gamma correction for GY-33 sensor

Arduino/McLighting/helper_functions.h

@@ -250,8 +250,8 @@ void initStrip(uint16_t _stripSize = Config.stripSize, uint8_t _num_segments = C
 }
 
 void getSegmentParams(uint8_t _seg) {
-  segState.start   = strip->getSegment(_seg)->start;;
+  segState.start   = strip->getSegment(_seg)->start;
-  segState.stop    = strip->getSegment(_seg)->stop;;
+  segState.stop    = strip->getSegment(_seg)->stop;
   //segState.mode[_seg]     = strip->getMode(_seg);
   //segState.speed[_seg]    = unconvertSpeed(strip->getSpeed(_seg));
   //fx_mode          = segState.mode[_seg];

Arduino/McLighting/mode_custom_ws2812fx_animations.h

@@ -101,7 +101,7 @@ uint16_t handleCustomWS(void) {
       }
     } else {
       if (millis() - dipStartTime[_seg_num] < darkTime[_seg_num]) {
-        for (uint16_t i=(_seg->start + 3); i<= _seg->stop; i++) {
+        for (uint16_t i = _seg->start; i <= _seg->stop; i++) {
           ledstates[i] = 0;
           for (uint16_t j=_seg->start; j<=_seg->stop; j++) {
             uint16_t index = (j%3 == 0) ? 400 : random(0,767);
@@ -119,6 +119,10 @@ uint16_t handleCustomWS(void) {
   // ***************************************************************************
   uint16_t handleE131(void) {
   WS2812FX::Segment* _seg = strip->getSegment();
+  return _seg->speed/(_seg->stop - _seg->start);
+  }
+  
+  void handleE131Play(void) {
     if (!e131->isEmpty()) {
       e131_packet_t packet;
       e131->pull(&packet); // Pull packet from ring buffer
@@ -126,7 +130,7 @@ uint16_t handleCustomWS(void) {
       uint16_t universe = htons(packet.universe);
       uint8_t *data = packet.property_values + 1;
 
-      if (universe < START_UNIVERSE || universe > END_UNIVERSE) return _seg->speed/(_seg->stop - _seg->start); //async will take care about filling the buffer
+      if (universe < START_UNIVERSE || universe > END_UNIVERSE) return; //async will take care about filling the buffer
 
       // Serial.printf("Universe %u / %u Channels | Packet#: %u / Errors: %u / CH1: %u\n",
       //               htons(packet.universe),                 // The Universe for this packet
@@ -140,11 +144,13 @@ uint16_t handleCustomWS(void) {
       uint16_t len = (128 + multipacketOffset > Config.stripSize) ? (Config.stripSize - multipacketOffset) : 128;
     #else*/
       uint16_t multipacketOffset = (universe - START_UNIVERSE) * 170; //if more than 170 LEDs * 3 colors = 510 channels, client will send in next higher universe
-      if (Config.stripSize <= multipacketOffset) return _seg->speed/(_seg->stop - _seg->start);
+      if (Config.stripSize <= multipacketOffset) return;
       uint16_t len = (170 + multipacketOffset > Config.stripSize) ? (Config.stripSize - multipacketOffset) : 170;
   /*  #endif */
+      for (uint8_t k = 0; k < Config.segments; k++) {
+        if (segState.mode[k] == FX_MODE_CUSTOM_3) {
           for (uint16_t i = 0; i < len; i++){
-        if ((i >= _seg->start) && (i <= _seg->stop)) {
+            if ((i >= strip->getSegment(k)->start) && (i <= strip->getSegment(k)->stop)) {
               uint16_t j = i * 3;
         /*  #if defined(RGBW)
               strip->setPixelColor(i + multipacketOffset, data[j], data[j + 1], data[j + 2], data[j + 3]);
@@ -154,7 +160,8 @@ uint16_t handleCustomWS(void) {
             }
           }
         }
-    return _seg->speed/(_seg->stop - _seg->start);
+      }
+    }
   }
 
   /*

Arduino/McLighting/request_handlers.h

@@ -1244,7 +1244,7 @@ void handleRemote() {
           _updateState = true;
         } else {
           State.mode = OFF;
-          _updateState = true;;
+          _updateState = true;
         }
       }
       if (State.mode == HOLD) {
@@ -1348,7 +1348,7 @@ void handleRemote() {
             last_remote_cmd = results.value;
             if (selected_color == 1) {
               if (main_color.green - chng >= 0) {
-                main_color.green = main_color.green - chng;;
+                main_color.green = main_color.green - chng;
                 _updateSegState = true;
               }
             }

Arduino/McLighting/version.h

@@ -1 +1 @@
-#define SKETCH_VERSION "3.1.0.BETA7"
+#define SKETCH_VERSION "3.1.0"

Arduino/McLighting/version_info.ino

@@ -248,8 +248,13 @@
  * Homeassistant will allways use active segment
  * E1.31 is only working for one segment at the moment
  * 
- * 27 January
+ * 27 January 2020
  * Version Bump to 3.1.0.BETA7
  * small API changes
  * work to solve heap problems
+ * 
+ * 23 February 2020
+ * Version Bump to 3.1.0
+ * bugfixes
+ * E1.31 is now working for multi segments
  */