simongehrig/McLighting
1
0
Fork 0
Code Issues 3 Pull Requests Projects Releases Wiki Activity

Minor changes

Browse Source 
Minor changes
This commit is contained in:
BPoH_Voodoo
2018-09-03 14:26:33 +02:00
parent 7a4f595c04
commit 9fb3f96e5f
2 changed files with 169 additions and 169 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Arduino/McLighting/definitions.h
+10 -10
View File
@@ -3,26 +3,26 @@
// Neopixel
#define PIN 15 // PIN (15 / D8) where neopixel / WS2811 strip is attached
#define NUMLEDS 194 // Number of leds in the strip
#define NUMLEDS 12 // Number of leds in the strip
#define BUILTIN_LED 2 // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192
#define BUTTON 14 // Input pin (14 / D5) for switching the LED strip on / off, connect this PIN to ground to trigger button.
#define BUTTON_GY33 12 // Input pin (12 / D6) for read color data with RGB sensor, connect this PIN to ground to trigger button.
#define BUTTON_GY33 12 // Input pin (12 / D6) for read color data with RGB sensor, connect this PIN to ground to trigger button.
#define RGBW // If defined, use RGBW Strips
const char HOSTNAME[] = "McLightingRGBW01"; // Friedly hostname
const char HOSTNAME[] = "FABLightingRGBW"; // Friedly hostname
#define HTTP_OTA // If defined, enable Added ESP8266HTTPUpdateServer
//#define ENABLE_OTA // If defined, enable Arduino OTA code.
#define ENABLE_AMQTT // If defined, enable Async MQTT code, see: https://github.com/marvinroger/async-mqtt-client
//#define ENABLE_MQTT // If defined, enable MQTT client code, see: https://github.com/toblum/McLighting/wiki/MQTT-API
//#define ENABLE_HOMEASSISTANT // If defined, enable Homeassistant integration, ENABLE_MQTT must be active
#define ENABLE_HOMEASSISTANT // If defined, enable Homeassistant integration, ENABLE_MQTT must be active
#define ENABLE_BUTTON // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control
#define ENABLE_BUTTON_GY33 // If defined, enable button handling code for GY-33 color sensor to scan color
//#define ENABLE_BUTTON_GY33 // If defined, enable button handling code for GY-33 color sensor to scan color
//#define MQTT_HOME_ASSISTANT_SUPPORT // If defined, use AMQTT and select Tools -> IwIP Variant -> Higher Bandwidth
#define ENABLE_LEGACY_ANIMATIONS
#define ENABLE_STATE_SAVE_SPIFFS // If defined, saves state on SPIFFS
//#define ENABLE_STATE_SAVE_EEPROM // If defined, save state on reboot
#define ENABLE_MQTT_HOSTNAME_CHIPID // Uncomment/comment to add ESPChipID to end of MQTT hostname
//#define ENABLE_MQTT_HOSTNAME_CHIPID // Uncomment/comment to add ESPChipID to end of MQTT hostname
#define DBG_OUTPUT_PORT Serial // Set debug output port
#if defined(USE_NEOANIMATIONFX) and defined(USE_WS2812FX)
@@ -43,10 +43,10 @@ const char HOSTNAME[] = "McLightingRGBW01"; // Friedly hostname
// parameters for automatically cycling favorite patterns
uint32_t autoParams[][4] = { // color, speed, mode, duration (seconds)
{0x00ff0000, 250, 1, 5.0}, // blink red for 5 seconds
{0x0000ff00, 200, 3, 10.0}, // wipe green for 10 seconds
{0x000000ff, 200, 14, 5.0}, // dual scan blue for 5 seconds
{0x000000ff, 200, 46, 15.0} // fireworks for 15 seconds
{0x00ff0000, 120, 1, 5.0}, // blink red for 5 seconds
{0x0000ff00, 120, 3, 10.0}, // wipe green for 10 seconds
{0x000000ff, 196, 14, 5.0}, // dual scan blue for 5 seconds
{0x000000ff, 196, 46, 15.0} // fireworks for 15 seconds
};
#if defined(ENABLE_MQTT) or defined(ENABLE_AMQTT)
Arduino/McLighting/request_handlers.h
+2 -2
View File
@@ -400,14 +400,14 @@ void autoTick() {
}
void handleAutoStart() {
mode = AUTO;
//mode = AUTO;
autoCount = 0;
autoTick();
strip.start();
}
void handleAutoStop() {
mode = OFF;
//mode = OFF;
autoTicker.detach();
strip.stop();
}