2.2.7.BETA1.rgbw.3colors

Arduino/McLighting/McLighting.ino

@@ -114,60 +114,57 @@ WS2812FX * strip = NULL;
 
   #if USE_WS2812FX_DMA == 0 // Uses GPIO3/RXD0/RX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
     #if !defined(LED_TYPE_WS2811) 
-      NeoEsp8266Dma800KbpsMethod * dma = NULL ; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+      NeoPixelBus<NeoRgbwFeature, NeoEsp8266Dma800KbpsMethod> * dma = NULL ; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
     #else
-      NeoEsp8266Dma400KbpsMethod * dma = NULL;  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+      NeoPixelBus<NeoRgbwFeature, NeoEsp8266Dma400KbpsMethod> * dma = NULL;  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
     #endif
   #endif
   #if USE_WS2812FX_DMA == 1 // Uses UART1: GPIO1/TXD0/TX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
     #if !defined(LED_TYPE_WS2811) 
-      NeoEsp8266Uart0800KbpsMethod * dma = NULL; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+      NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart0800KbpsMethod> * dma = NULL; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
     #else
-      NeoEsp8266Uart0400KbpsMethod * dma = NULL; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+      NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart0400KbpsMethod> * dma = NULL; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
     #endif
   #endif
   #if USE_WS2812FX_DMA == 2 // Uses UART2: GPIO2/TXD1/D4, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
     #if !defined(LED_TYPE_WS2811) 
-      NeoEsp8266Uart1800KbpsMethod * dma = NULL; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+      NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart1800KbpsMethod> * dma = NULL; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
     #else
-      NeoEsp8266Uart1400KbpsMethod * dma = NULL; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+      NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart1400KbpsMethod> * dma = NULL; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
     #endif
   #endif
   
   void initDMA(uint16_t stripSize = NUMLEDS){
     if (dma != NULL) { delete(dma); }
-    uint8_t ledcolors = 3;
-    if (strstr(WS2812FXStripSettings.RGBOrder, "W") != NULL) {
-      ledcolors = 4;
-    }
   #if USE_WS2812FX_DMA == 0 // Uses GPIO3/RXD0/RX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
     #if !defined(LED_TYPE_WS2811)  
-      dma = new NeoEsp8266Dma800KbpsMethod(stripSize, ledcolors);  //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+      dma = new NeoPixelBus<NeoRgbwFeature, NeoEsp8266Dma800KbpsMethod>(stripSize);  //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
     #else
-      dma = new NeoEsp8266Dma400KbpsMethod(stripSize, ledcolors);  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+      dma = new NeoPixelBus<NeoRgbwFeature, NeoEsp8266Dma400KbpsMethod>(stripSize);  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
     #endif
   #endif
   #if USE_WS2812FX_DMA == 1 // Uses UART1: GPIO1/TXD0/TX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
     #if !defined(LED_TYPE_WS2811) 
-      dma = new NeoEsp8266Uart0800KbpsMethod(stripSize, ledcolors); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+      dma = new NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart0800KbpsMethod>(stripSize); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
     #else
-      dma = new NeoEsp8266Uart0400KbpsMethod(stripSize, ledcolors); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+      dma = new NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart0400KbpsMethod>(stripSize); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
     #endif
   #endif
   #if USE_WS2812FX_DMA == 2 // Uses UART2: GPIO2/TXD1/D4, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
     #if !defined(LED_TYPE_WS2811) 
-      dma = new NeoEsp8266Uart1800KbpsMethod(stripSize, ledcolors); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+      dma = new NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart1800KbpsMethod>(stripSize); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
     #else
-      dma = new NeoEsp8266Uart1400KbpsMethod(stripSize, ledcolors); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+      dma = new NeoPixelBus<NeoRgbwFeature, NeoEsp8266Uart1400KbpsMethod>(stripSize); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
     #endif
   #endif
-    dma->Initialize();
+    dma->Begin();
   }
 
   void DMA_Show(void) {
-    if(dma->IsReadyToUpdate()) {
+    if(dma->CanShow()) {
-      memcpy(dma->getPixels(), strip->getPixels(), dma->getPixelsSize());
+      memcpy(dma->Pixels(), strip->getPixels(), dma->PixelsSize());
-      dma->Update(false);
+      dma->Dirty();
+      dma->Show();
     }
   }
 #endif
@@ -312,12 +309,11 @@ void initStrip(uint16_t stripSize = WS2812FXStripSettings.stripSize, char RGBOrd
     initDMA(stripSize);
     strip->setCustomShow(DMA_Show);
   #endif
-  strip->setBrightness(brightness);
 //parameters: index, start, stop, mode, color, speed, options
   strip->setSegment(0,  0,  stripSize - 1, ws2812fx_mode, hex_colors, convertSpeed(ws2812fx_speed), fxoptions);
 #if defined(CUSTOM_WS2812FX_ANIMATIONS)
   strip->setCustomMode(0, F("Fire 2012"), myCustomEffect0);
-//strip->setCustomMode(1, F("CustEffect"), myCustomEffect1);
+  strip->setCustomMode(1, F("Gradient"),  myCustomEffect1);
   gReverseDirection = (WS2812FXStripSettings.fxoptions & 128);
 #endif
 #if defined(ENABLE_E131)
@@ -674,8 +670,6 @@ void setup() {
   if (mdns_result) {
     MDNS.addService("http", "tcp", 80);
   }
-
-  prevmode = mode;
   
   #if defined(ENABLE_BUTTON_GY33)
     tcs.setConfig(MCU_LED_06, MCU_WHITE_ON);
@@ -684,9 +678,9 @@ void setup() {
   #endif
   #if defined(ENABLE_REMOTE)
     irrecv.enableIRIn();  // Start the receiver
-    snprintf(last_state, sizeof(last_state), "STA|%2d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d", mode, ws2812fx_mode, ws2812fx_speed, brightness, main_color.red, main_color.green, main_color.blue, main_color.white, back_color.red, back_color.green, back_color.blue, back_color.white, xtra_color.red, xtra_color.green, xtra_color.blue,xtra_color.white);
-    last_state[sizeof(last_state)]= 0x00;
   #endif
+  snprintf(last_state, sizeof(last_state), "STA|%2d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d|%3d", mode, ws2812fx_mode, ws2812fx_speed, brightness, main_color.red, main_color.green, main_color.blue, main_color.white, back_color.red, back_color.green, back_color.blue, back_color.white, xtra_color.red, xtra_color.green, xtra_color.blue,xtra_color.white);
+  last_state[sizeof(last_state)]= 0x00;
   DBG_OUTPUT_PORT.println("finished Main Setup!");
 
   initStrip();
@@ -751,35 +745,43 @@ void loop() {
     if(!strip->isRunning()) strip->start();
   } 
 
-  if ((mode == OFF) || (mode == TV) || (mode == E131)) {
+  if (((mode == OFF) && (brightness_actual == 0)) || (mode == TV) || (mode == E131)) {
     if(strip->isRunning()) {
-      strip->strip_off();         // Workaround: to be shure,
+      strip->strip_off();        // Workaround: to be shure,
       delay(10);                 // that strip is really off. Sometimes strip->stop isn't enought
-      strip->stop();              // should clear memory
+      strip->stop();             // should clear memory
     } else {
       if (prevmode != mode) {    // Start temporarily to clear strip
         strip->start();
-        strip->strip_off();       // Workaround: to be shure,
+        strip->strip_off();      // Workaround: to be shure,
         delay(10);               // that strip is really off. Sometimes strip->stop isn't enought
-        strip->stop();            // should clear memory
+        strip->stop();           // should clear memory
       }
     }
   }
     
-  if (( mode == AUTO) || (mode == HOLD)) { // strip->service() is only needed for modes with WS2812FX functionality
+  if (( mode == AUTO) || (mode == HOLD) || ((mode == OFF) && (brightness !=0))) { 
-    strip->service();
+    strip->service();            // strip->service() is only needed for modes with WS2812FX functionality
   }
   
-  if ((prevmode == AUTO) && (mode != AUTO)) { handleAutoStop(); } // stop auto mode
+  if ((prevmode == AUTO) && (mode != AUTO)) {
+    handleAutoStop();            // stop auto mode
+  }
   
   if (mode == OFF) {
-    #if defined(ENABLE_MQTT)
+    if (prevmode != mode) {
-      if (prevmode != mode) { snprintf(mqtt_buf, sizeof(mqtt_buf), "OK =off", ""); }
+      #if defined(ENABLE_MQTT)
-    #endif
+         snprintf(mqtt_buf, sizeof(mqtt_buf), "OK =off", "");
+      #endif
+      if (fadeEffect) { 
+        brightness_fade   = 0;
+      } 
+    }
   }
   
   if (mode == AUTO) {
     if (prevmode != mode) {
+      brightness_fade = brightness;
       handleAutoStart();
       #if defined(ENABLE_MQTT)
         snprintf(mqtt_buf, sizeof(mqtt_buf), "OK =auto", "");
@@ -789,19 +791,25 @@ void loop() {
     
   #if defined(ENABLE_TV)
     if (mode == TV) {
-      handleTV();
+      if (prevmode != mode) {
+        brightness_fade = brightness;
       #if defined(ENABLE_MQTT)
-        if (prevmode != mode) { snprintf(mqtt_buf, sizeof(mqtt_buf), "OK =tv", ""); }
+        snprintf(mqtt_buf, sizeof(mqtt_buf), "OK =tv", ""); 
       #endif
+      }
+      handleTV();
     }
   #endif
   
   #if defined(ENABLE_E131)
     if (mode == E131) {
-      handleE131();
+      if (prevmode != mode) {
+        brightness_fade = brightness;
       #if defined(ENABLE_MQTT)
-        if (prevmode != mode) { snprintf(mqtt_buf, sizeof(mqtt_buf), "OK =e131", ""); }
+        snprintf(mqtt_buf, sizeof(mqtt_buf), "OK =e131", "");
       #endif
+      }
+      handleE131();
     }
   #endif
  
@@ -816,16 +824,18 @@ void loop() {
   }
   
   if (mode == SET_ALL) {
-    mode = HOLD;
+    mode = prevmode;
-    if ((prevmode == OFF) || (prevmode == AUTO) || (prevmode == TV) || (prevmode == E131)) { setModeByStateString(last_state); }
+    if ((prevmode == OFF) || (prevmode == AUTO) || (prevmode == TV) || (prevmode == E131)) {
+      setModeByStateString(last_state);
+    }
     #if defined(ENABLE_MQTT)
       snprintf(mqtt_buf, sizeof(mqtt_buf), "OK /%i", ws2812fx_mode);
     #endif
     strip->setMode(ws2812fx_mode);
+    if (fade_cnt==0) { fade_cnt=1;   }
+    if (!fadeEffect) { fade_cnt=255; }
+    brightness_fade = brightness;
     convertColors();
-    strip->setColors(0, hex_colors);
-    strip->setSpeed(convertSpeed(ws2812fx_speed));
-    strip->setBrightness(brightness);
     prevmode = SET_ALL;
     strip->trigger();
   }  
@@ -836,40 +846,95 @@ void loop() {
       snprintf(mqtt_buf, sizeof(mqtt_buf), "OK /%i", ws2812fx_mode);
     #endif
     strip->setMode(ws2812fx_mode);
+    brightness_fade = brightness;
     prevmode = SET_MODE;
     strip->trigger();
   }
     
   if (mode == SET_COLOR) {
+    if (fade_cnt==0) { fade_cnt=1; }
+    if (!fadeEffect) { fade_cnt=255; }
     convertColors();
-    strip->setColors(0, hex_colors);
     mode = prevmode;
     prevmode = SET_COLOR;
-    //DBG_OUTPUT_PORT.printf("mode: %d\r\n", mode);
-    if (mode == HOLD) strip->trigger();
   }
+  // Async color transition
+  if ((fade_cnt > 0) && (fade_cnt < 254)) {
+    if ((fadeEffect) && (colorFadeDelay <= millis())) {
+      hex_colors_actual[0] = fade(hex_colors[0], hex_colors_mem[0], fade_cnt);
+      hex_colors_actual[1] = fade(hex_colors[1], hex_colors_mem[1], fade_cnt);
+      hex_colors_actual[2] = fade(hex_colors[2], hex_colors_mem[2], fade_cnt);
+      fade_cnt++;
+      colorFadeDelay = millis() + FADE_COLOR_DELAY;
+      strip->setColors(0, hex_colors_actual);
+      if ((mode == HOLD) && ((ws2812fx_mode != 1) && (ws2812fx_mode != 2) && (ws2812fx_mode != 8) && (ws2812fx_mode != 9) &&(ws2812fx_mode != 10) && (ws2812fx_mode != 15))) strip->trigger();
+    }
+  }
+  if (fade_cnt >= 254) {
+    strip->setColors(0, hex_colors);
+    if (mode == HOLD) strip->trigger();
+    fade_cnt = 0;
+  }
+  
   if (mode == SET_SPEED) {
     #if defined(ENABLE_MQTT)
       snprintf(mqtt_buf, sizeof(mqtt_buf), "OK ?%i", ws2812fx_speed);
     #endif
-    strip->setSpeed(convertSpeed(ws2812fx_speed));
     mode = prevmode;
     prevmode = SET_SPEED;
-    if (mode == HOLD) strip->trigger();
   }
+  // Async speed transition
+  if (ws2812fx_speed_actual != ws2812fx_speed) {
+    if (fadeEffect) {
+      if (speedFadeDelay <= millis()) {
+        if (ws2812fx_speed_actual < ws2812fx_speed) {
+          ws2812fx_speed_actual++;     
+        }
+        if (ws2812fx_speed_actual > ws2812fx_speed) {
+          ws2812fx_speed_actual--;     
+        }
+        speedFadeDelay = millis() + FADE_DELAY;
+        strip->setSpeed(convertSpeed(ws2812fx_speed_actual));
+        if ((mode == HOLD) && ((ws2812fx_mode != 1) && (ws2812fx_mode != 2) && (ws2812fx_mode != 8) && (ws2812fx_mode != 9) &&(ws2812fx_mode != 10) && (ws2812fx_mode != 15))) strip->trigger();
+      }
+    } else {
+       ws2812fx_speed_actual = ws2812fx_speed;
+       strip->setSpeed(ws2812fx_speed);
+       if (mode == HOLD) strip->trigger();
+    }
+  }
+  
   if (mode == SET_BRIGHTNESS) {
     #if defined(ENABLE_MQTT)
       snprintf(mqtt_buf, sizeof(mqtt_buf), "OK %%%i", brightness);
     #endif
-    strip->setBrightness(brightness);
+    brightness_fade = brightness;
     mode = prevmode;
     prevmode = SET_BRIGHTNESS;
-    //DBG_OUTPUT_PORT.printf("mode: %d\r\n", mode);
-    if (mode == HOLD) strip->trigger();
   }
- 
+  // Async brightness transition
-  if (prevmode != mode) {  
+  if (brightness_actual != brightness_fade) {
-    if ((prevmode != AUTO) && (prevmode != INIT_STRIP)) {  // do not save if AUTO Mode was set
+    if (fadeEffect) {
+      if(brightnessFadeDelay <= millis()) {
+        if (brightness_actual < brightness_fade) {
+          brightness_actual++;     
+        }
+        if (brightness_actual > brightness_fade) {
+          brightness_actual--;     
+        }
+        brightnessFadeDelay = millis() + FADE_DELAY;
+        strip->setBrightness(brightness_actual);
+        if ((mode == HOLD) && ((ws2812fx_mode != 1) && (ws2812fx_mode != 2) && (ws2812fx_mode != 8) && (ws2812fx_mode != 9) &&(ws2812fx_mode != 10) && (ws2812fx_mode != 15))) strip->trigger();
+      }
+    } else {
+       brightness_actual = brightness;
+       strip->setBrightness(brightness_actual);
+       if (mode == HOLD) strip->trigger();
+    }
+  }
+
+  if (prevmode != mode) {
+    if (prevmode != INIT_STRIP) {  // do not save if INIT_STRIP mode was set
       #if defined(ENABLE_STATE_SAVE)
         if(!settings_save_state.active()) settings_save_state.once(3, tickerSaveState);
       #endif

Arduino/McLighting/definitions.h

@@ -21,7 +21,7 @@ char HOSTNAME[65] = "McLightingRGBW"; // Friedly hostname  is configurable just
 #define ENABLE_HOMEASSISTANT          // If defined, enable Homeassistant integration, ENABLE_MQTT must be active
 #define MQTT_HOME_ASSISTANT_SUPPORT   // If defined, use AMQTT and select Tools -> IwIP Variant -> Higher Bandwidth
 #define ENABLE_BUTTON 14              // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control, the value defines the input pin (14 / D5) for switching the LED strip on / off, connect this PIN to ground to trigger button.
-//#define ENABLE_BUTTON_GY33 12         // If defined, enable button handling code for GY-33 color sensor to scan color. The value defines the input pin (12 / D6) for read color data with RGB sensor, connect this PIN to ground to trigger button.
+#define ENABLE_BUTTON_GY33 12         // If defined, enable button handling code for GY-33 color sensor to scan color. The value defines the input pin (12 / D6) for read color data with RGB sensor, connect this PIN to ground to trigger button.
 #if defined(ENABLE_BUTTON_GY33)
   #define GAMMA 2.5                   // Gamma correction for GY-33 sensor
 #endif
@@ -35,6 +35,15 @@ char HOSTNAME[65] = "McLightingRGBW"; // Friedly hostname  is configurable just
 #define ENABLE_TV                     // Enable TV Animation 
 #define USE_HTML_MIN_GZ               // uncomment for using index.htm & edit.htm from PROGMEM instead of SPIFFs
 
+#define FADE_COLOR_DELAY 5            // Delay for color transition
+#define FADE_DELAY 10                 // Delay for brightness and speed transition
+
+bool fadeEffect  = true;              // Experimental: Enable transitions of color, brightness and speed. It does not work properly for all effects.
+uint8_t fade_cnt = 0;
+unsigned long colorFadeDelay = 0;
+unsigned long brightnessFadeDelay = 0;
+unsigned long speedFadeDelay = 0;
+
 #if defined(ENABLE_E131)
   #define MULTICAST false
   #define START_UNIVERSE 1            // First DMX Universe to listen for
@@ -82,7 +91,7 @@ char HOSTNAME[65] = "McLightingRGBW"; // Friedly hostname  is configurable just
 #endif
 
 // parameters for automatically cycling favorite patterns
-uint32_t autoParams[][6] = {   // main_color, back_color, xtra_color, speed, mode, duration (seconds)
+uint32_t autoParams[][6] = {   // main_color, back_color, xtra_color, speed, mode, duration (milliseconds)
   {0x00ff0000, 0x0000ff00, 0x00000000, 200,  1,  5000}, // blink red/geen for 5 seconds
   {0x0000ff00, 0x000000ff, 0x00000000, 200,  3, 10000}, // wipe green/blue for 10 seconds
   {0x000000ff, 0x00ff0000, 0x00000000,  60, 14, 10000}, // dual scan blue on red for 10 seconds
@@ -133,20 +142,21 @@ uint32_t autoParams[][6] = {   // main_color, back_color, xtra_color, speed, mod
 #define DBG_OUTPUT_PORT Serial  // Set debug output port
 
 // List of all color modes
-#if defined(ENABLE_LEGACY_ANIMATIONS)
+enum MODE {OFF, AUTO, TV, E131, CUSTOM, HOLD, SET_ALL, SET_MODE, SET_COLOR, SET_SPEED, SET_BRIGHTNESS, INIT_STRIP};
-  enum MODE {OFF, AUTO, TV, E131, CUSTOM, HOLD, SET_ALL, SET_MODE, SET_COLOR, SET_SPEED, SET_BRIGHTNESS, INIT_STRIP, WIPE, RAINBOW, RAINBOWCYCLE, THEATERCHASE, TWINKLERANDOM, THEATERCHASERAINBOW};
-#else
-  enum MODE {OFF, AUTO, TV, E131, CUSTOM, HOLD, SET_ALL, SET_MODE, SET_COLOR, SET_SPEED, SET_BRIGHTNESS, INIT_STRIP};
-#endif
 MODE mode = SET_ALL;        // Standard mode that is active when software starts
-MODE prevmode = mode;
+MODE prevmode = INIT_STRIP;
 
-uint8_t ws2812fx_speed = 196;  // Global variable for storing the delay between color changes --> smaller == faster
+uint8_t ws2812fx_speed        = 196;  // Global variable for storing the speed for effects --> smaller == slower
-uint8_t brightness = 196;      // Global variable for storing the brightness (255 == 100%)
+uint8_t ws2812fx_speed_actual = 196;  // Global variable for storing the speed for effects while fading --> smaller == slower
-uint8_t ws2812fx_mode = 0;     // Global variable for storing the WS2812FX modes
+uint8_t brightness            = 196;  // Global variable for storing the brightness (255 == 100%)
+uint8_t brightness_actual     = 0;    // Global variable for storing the brightness while fadeing (255 == 100%)
+uint8_t brightness_fade       = 0;    // Global variable for storing the brightness before change
+uint8_t ws2812fx_mode         = 0;    // Global variable for storing the WS2812FX modes
 
-uint32_t hex_colors[3] = {};   // Color array for setting WS2812FX
+uint32_t hex_colors[3]        = {};   // Color array for setting colors of WS2812FX
-struct ledstate                // Data structure to store a state of a single led
+uint32_t hex_colors_actual[3] = {};   // Color array for actual colors of WS2812FX while fading
+uint32_t hex_colors_mem[3]    = {};   // Color array of colors of WS2812FX before fading 
+struct ledstate                       // Data structure to store a state of a single led
 {
   uint8_t red;
   uint8_t green;
@@ -162,7 +172,7 @@ LEDState xtra_color = {   0, 0, 0, 0 };  // Store the "3rd color" of the strip u
 
 bool updateConfig = false;  // For WiFiManger custom config and config
 char last_state[67];            // Keeps the state representation before auto or off mode 
-bool updateState = false;
+bool updateState  = false;
 
 // Button handling
 

Arduino/McLighting/mode_custom_ws2812fx_animations.h

@@ -86,7 +86,26 @@ void Fire2012() {
   }
 }
 
+void Gradient() {
+  for( uint16_t j = 0; j < WS2812FXStripSettings.stripSize; j++) {
+    uint16_t pixelnumber;
+    uint32_t color;
+    if( gReverseDirection ) {
+      pixelnumber = (WS2812FXStripSettings.stripSize - 1) - j;
+    } else {
+      pixelnumber = j;
+    }
+    color = fade(hex_colors_actual[1], hex_colors_actual[0], (j*255)/(WS2812FXStripSettings.stripSize - 1));
+    strip->setPixelColor(pixelnumber, ((color >> 16) & 0xFF), ((color >> 8) & 0xFF), ((color >> 0) & 0xFF), ((color >> 24) & 0xFF));
+  }
+}
+
 uint16_t myCustomEffect0() {
   Fire2012();
   return (strip->getSpeed() / WS2812FXStripSettings.stripSize);
 }
+
+uint16_t myCustomEffect1() {
+  Gradient();
+  return (strip->getSpeed() / WS2812FXStripSettings.stripSize);
+}

Arduino/McLighting/request_handlers.h

@@ -52,13 +52,20 @@ void handleE131(){
 
 // Call convertColors whenever main_color, back_color or xtra_color changes.
 void convertColors() {
+  if ((fadeEffect) && (fade_cnt > 1) && (fade_cnt < 254)) {
+    memcpy(hex_colors_mem, hex_colors_actual, sizeof(hex_colors_actual));
+    DBG_OUTPUT_PORT.println("Color transistion aborted. Restarting...!");
+    fade_cnt = 1;
+  } else {
+    memcpy(hex_colors_mem, hex_colors, sizeof(hex_colors));
+  }
   hex_colors[0] = (uint32_t)(main_color.white << 24) | (main_color.red << 16) | (main_color.green << 8) | main_color.blue;
   hex_colors[1] = (uint32_t)(back_color.white << 24) | (back_color.red << 16) | (back_color.green << 8) | back_color.blue;
   hex_colors[2] = (uint32_t)(xtra_color.white << 24) | (xtra_color.red << 16) | (xtra_color.green << 8) | xtra_color.blue;
+  memcpy(hex_colors_actual, hex_colors, sizeof(hex_colors));  
 }
 
 void getArgs() {
-  
   if (mode == SET_ALL || mode == SET_COLOR) {
     if (server.arg("rgb") != "") {
       uint32_t rgb = (uint32_t) strtoul(server.arg("rgb").c_str(), NULL, 16);
@@ -132,7 +139,6 @@ void getArgs() {
     xtra_color.green = constrain(xtra_color.green, 0, 255);
     xtra_color.blue = constrain(xtra_color.blue, 0, 255);
     xtra_color.white = constrain(xtra_color.white, 0, 255);
-    convertColors();
   }
   if (mode == SET_ALL || mode == SET_SPEED || mode == TV) {
     if ((server.arg("s") != "") && (server.arg("s").toInt() >= 0) && (server.arg("s").toInt() <= 255)) {
@@ -461,12 +467,13 @@ bool setModeByStateString(String saved_state_string) {
     xtra_color.blue = str_blue.toInt();
     str_white = getValue(saved_state_string, '|', 16);
     xtra_color.white = str_white.toInt();
-    convertColors();
     DBG_OUTPUT_PORT.print("Set to state: ");
     DBG_OUTPUT_PORT.println(listStatusJSON());
+    //prevmode=mode;
+    //mode = SET_ALL;
     return true;
   } else {
-    DBG_OUTPUT_PORT.println("Saved conf not found!");
+    DBG_OUTPUT_PORT.println("Saved state not found!");
     return false;    
   }
   return false;
@@ -717,9 +724,10 @@ void autoTick() {
   strip->setColors(0, setcolors);
   strip->setSpeed(convertSpeed((uint8_t)autoParams[autoCount][3]));
   strip->setMode((uint8_t)autoParams[autoCount][4]);
+  strip->trigger();
   autoTicker.once_ms((uint32_t)autoParams[autoCount][5], autoTick);
   DBG_OUTPUT_PORT.print("autoTick ");
-    DBG_OUTPUT_PORT.printf("autoTick[%d]: {0x%06x, %d, %d, %d}\r\n", autoCount, autoParams[autoCount][0], (uint8_t)autoParams[autoCount][1], (uint8_t)autoParams[autoCount][2], (uint32_t)autoParams[autoCount][3], (uint32_t)autoParams[autoCount][4], (uint32_t)autoParams[autoCount][5]);
+    DBG_OUTPUT_PORT.printf("autoTick[%d]: {0x%08x, 0x%08x, 0x%08x, %d, %d, %d}\r\n", autoCount, autoParams[autoCount][0], autoParams[autoCount][1], autoParams[autoCount][2], autoParams[autoCount][3], autoParams[autoCount][4], autoParams[autoCount][5]);
 
   autoCount++;
   if (autoCount >= (sizeof(autoParams) / sizeof(autoParams[0]))) autoCount = 0;
@@ -1506,7 +1514,6 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
   #endif
 #endif
 
-
 // ***************************************************************************
 // Button management
 // ***************************************************************************
@@ -1515,7 +1522,6 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
     DBG_OUTPUT_PORT.printf("Short button press\r\n");
     if (mode == OFF) {
       setModeByStateString(BTN_MODE_SHORT);
-      prevmode = mode;
       mode = SET_ALL;
     } else {
       mode = OFF;
@@ -1526,7 +1532,6 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
   void mediumKeyPress() {
     DBG_OUTPUT_PORT.printf("Medium button press\r\n");
     setModeByStateString(BTN_MODE_MEDIUM);
-    prevmode = mode;
     mode = SET_ALL;
   }
 
@@ -1534,7 +1539,6 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
   void longKeyPress() {
     DBG_OUTPUT_PORT.printf("Long button press\r\n");
     setModeByStateString(BTN_MODE_LONG);
-    prevmode = mode;
     mode = SET_ALL;
   }
 
@@ -1579,9 +1583,7 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
     tcs.getData(&r, &g, &b, &col, &conf);
     DBG_OUTPUT_PORT.printf("Colors: R: [%d] G: [%d] B: [%d] Color: [%d] Conf: [%d]\r\n", (int)r, (int)g, (int)b, (int)col, (int)conf);
     main_color.red = (pow((r/255.0), GAMMA)*255); main_color.green = (pow((g/255.0), GAMMA)*255); main_color.blue = (pow((b/255.0), GAMMA)*255);main_color.white = 0; 
-    ws2812fx_mode = FX_MODE_STATIC;
+    mode = SET_COLOR;
-    prevmode = HOLD;
-    mode = SET_ALL;
   }
 
   // called when button is kept pressed for less than 2 seconds
@@ -1726,7 +1728,7 @@ void webSocketEvent(uint8_t num, WStype_t type, uint8_t * payload, size_t lenght
             checkRGBOrder(tmp_rgbOrder);
             uint8_t temp_pin;
             checkPin((uint8_t) root["ws_pin"]);
-            WS2812FXStripSettings.fxoptions = constrain(root["ws_fxopt"].as<uint8_t>(), 0, 255) && 0xFE;
+            WS2812FXStripSettings.fxoptions = constrain(root["ws_fxopt"].as<uint8_t>(), 0, 255) & 0xFE;
             jsonBuffer.clear();
             return true;
           } else {
@@ -2122,3 +2124,17 @@ void handleRemote() {
     }
   }
 #endif
+
+uint32_t scale_wrgb(uint32_t wrgb, uint8_t level) {
+    uint8_t w = ((wrgb >> 24) & 0xFF) * level / 255;
+    uint8_t r = ((wrgb >> 16) & 0xFF) * level / 255;
+    uint8_t g = ((wrgb >>  8) & 0xFF) * level / 255;
+    uint8_t b = ((wrgb) & 0xFF)       * level / 255;
+    return (w << 24) | (r << 16) | (g << 8) | b;
+}
+
+uint32_t fade(uint32_t newcolor, uint32_t oldcolor, uint8_t level) {
+  newcolor = scale_wrgb(newcolor, level);
+  oldcolor = scale_wrgb(oldcolor, 255-level);
+  return newcolor + oldcolor;
+}

Arduino/McLighting/version.h

@@ -1 +1 @@
-#define SKETCH_VERSION "2.2.6.RU1.rgbw.3c"
+#define SKETCH_VERSION "2.2.7.BETA1.rgbw.3c"

Arduino/McLighting/version_info.ino

@@ -165,4 +165,11 @@
  * adressed issue: #31
  * adressed issue: #32 
  * 
+ * 15 September 2019
+ * Version Bump to 2.2.7.BETA1.rgbw.3colors
+ * adressed issue: #25 (added Custom Animation 'Gradient')
+ * adressed issue: #30 (Status 'AUTO' is saved now)
+ * adressed issue: https://github.com/toblum/McLighting/issues/403 (Experimental Support of transitions: set fadeEffect = true in definitions.h)
+ * corrected use of DMA for Neopixelbus by Makuna (Tests for other strips than SK6812 GRBW were not made)
+ * 
  */

README.md

@@ -1,6 +1,6 @@
 # McLighting v2 - The ESP8266 based multi-client lighting gadget
 
-[![Gitter](https://badges.gitter.im/mclighting/Lobby.svg)](https://gitter.im/mclighting/Lobby?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) [![Build Status](https://travis-ci.com/toblum/McLighting.svg?branch=master)](https://travis-ci.com/toblum/McLighting) [![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT) [![version](https://img.shields.io/badge/version-v2.2.4-blue.svg)](https://github.com/toblum/McLighting/blob/master/Arduino/McLighting/version.h)
+[![Gitter](https://badges.gitter.im/mclighting/Lobby.svg)](https://gitter.im/mclighting/Lobby?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) [![Build Status](https://travis-ci.com/toblum/McLighting.svg?branch=master)](https://travis-ci.com/toblum/McLighting) [![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT) [![version](https://img.shields.io/badge/version-v2.2.7-blue.svg)](https://github.com/toblum/McLighting/blob/master/Arduino/McLighting/version.h)
 
 McLighting (the multi-client lighting gadget) is a very cheap internet-controllable lighting solution based on the famous ESP8266 microcontroller and WS2811/2812 led strips. It features among other things a web-interface, a REST-API and a websocket connector.
 
@@ -61,17 +61,20 @@ I hope I didn't miss any sources and mentioned every author. In case I forgot so
 
 ## Todos
 - [ ] Support multiple strips and control them separately or together [Issue](https://github.com/toblum/McLighting/issues/118)
-- [ ] Make number of pixels, MQTT and PIN configurable via front end [Issue](https://github.com/toblum/McLighting/issues/93) and [Issue](https://github.com/toblum/McLighting/issues/93)
-- [ ] Bundle webpages instead of SPIFFS [Issue](https://github.com/toblum/McLighting/issues/93)
 - [ ] Remove old / wrong EEPROM settings completely [Issue]
 - [ ] Customer profile to define segments of (in)active areas on the strip [Issue](https://github.com/toblum/McLighting/issues/37)
 - [ ] Additional clients
 - [ ] If no wifi, at least enable button mode.
 - [ ] Also enable McLighting in Wifi AP mode.
-- [ ] IR remote support [issue](https://github.com/toblum/McLightingUI/issues/3)
 - [ ] Multiple buttons/GPIO Inputs. [Issue](https://github.com/toblum/McLighting/issues/119)
 - [ ] Music visualizer / Bring back ArtNet [Issue](https://github.com/toblum/McLighting/issues/111)
 - [ ] Display version and parameters (Number of LEDs, definition settings, ..) in the web UI [Issue](https://github.com/toblum/McLighting/issues/150)
+- [x] Save status: Added saving of status 'AUTO'. [Issue] https://github.com/FabLab-Luenen/McLighting/issues/30
+- [x] EXPERIMENTAL: Added transition feature on changing values of color brightness and speed. ATTENTION! Does not work proberly for all WS2812fx effects.
+- [x] Added Custom Animation 'Gradient': [Issue] https://github.com/FabLab-Luenen/McLighting/issues/25
+- [x] Make number of pixels, MQTT and PIN configurable via front end [Issue](https://github.com/toblum/McLighting/issues/93) and [Issue](https://github.com/toblum/McLighting/issues/93)
+- [x] Bundle webpages instead of SPIFFS [Issue](https://github.com/toblum/McLighting/issues/93)
+- [x] IR remote support [issue](https://github.com/toblum/McLightingUI/issues/3)
 - [x] MQTT support
 - [x] Save favourite effects? [Issue](https://github.com/toblum/McLighting/issues/35)(https://github.com/toblum/McLighting/issues/101)
 - [x] OTA update [Issue](https://github.com/toblum/McLighting/issues/92)
@@ -95,4 +98,4 @@ I hope I didn't miss any sources and mentioned every author. In case I forgot so
 You use this project at your own risk. This is not a solution that should be used in productive environments, but this code and guide could give you a quick start for your own experiments. Please keep also in mind that there are currently some security features missing.
 
 
-*More information will be added as soon as I clean up the code and complete documentation.*
+*More information will be added as soon as I clean up the code and complete documentation.*

platformio.ini

@@ -25,6 +25,8 @@ description = The ESP8266 based multi-client lighting gadget
 #   arduino core 2.4.1 = platformIO 1.7.3
 #   arduino core 2.4.2 = platformIO 1.8.0
 #   arduino core 2.5.0 = platformIO 2.0.4
+#   arduino core 2.5.1 = platformIO 2.1.1
+#   arduino core 2.5.2 = platformIO 2.2.3
 #   arduino core stage = platformIO feature#stage
 # ------------------------------------------------------------------------------
 arduino_core_2_3_0 = espressif8266@1.5.0
@@ -33,7 +35,7 @@ arduino_core_2_4_1 = espressif8266@1.7.3
 arduino_core_2_4_2 = espressif8266@1.8.0
 arduino_core_2_5_0 = espressif8266@2.0.4
 arduino_core_2_5_1 = espressif8266@2.1.1
-arduino_core_2_5_2 = espressif8266@2.2.0
+arduino_core_2_5_2 = espressif8266@2.2.3
 arduino_core_stage = https://github.com/platformio/platform-espressif8266.git#feature/stage
 
 framework = arduino