Merge branch 'master' into development
This commit is contained in:
bpohvoodoo
GitHub
@@ -2693,4 +2693,4 @@ document.addEventListener("DOMContentLoaded", function(event) {
|
||||
});
|
||||
</script>
|
||||
</body>
|
||||
</html>
|
||||
</html>
|
||||
+236
-236
@@ -1,236 +1,236 @@
|
||||
#define USE_WS2812FX_DMA 0 // 0 = Used PIN is ignored & set to RX/GPIO3; 1 = Used PIN is ignored & set to TX/GPIO1; 2 = Used PIN is ignored & set to D4/GPIO2; Uses WS2812FX, see: https://github.com/kitesurfer1404/WS2812FX
|
||||
// or comment it out
|
||||
#if defined(USE_WS2812FX_DMA)
|
||||
#define MAXLEDS 384 // due to memory limit of esp8266 at the moment only 384 leds are supported in DMA Mode. More can crash if mqtt is used.
|
||||
#else
|
||||
#define MAXLEDS 4096
|
||||
#endif
|
||||
// Neopixel
|
||||
#define LED_PIN 3 // PIN (15 / D8) where neopixel / WS2811 strip is attached; is configurable, if USE_WS2812FX_DMA is not defined. Just for the start
|
||||
#define NUMLEDS 50 // Number of leds in the; is configurable just for the start
|
||||
#define RGBORDER "GRBW" // RGBOrder; is configurable just for the start
|
||||
#define FX_OPTIONS 48 // ws2812fx Options 48 = SIZE_SMALL + FADE_MEDIUM is configurable just for the start; for WS2812FX setSegment OPTIONS, see: https://github.com/kitesurfer1404/WS2812FX/blob/master/extras/WS2812FX%20Users%20Guide.md
|
||||
//#define LED_TYPE_WS2811 // Uncomment, if LED type uses 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
|
||||
#define LED_BUILTIN 2 // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192
|
||||
char HOSTNAME[65] = "McLightingRGBW"; // Friedly hostname is configurable just for the start. Hostname should not contain spaces as this can break Home Assistant discovery if used.
|
||||
|
||||
#define ENABLE_OTA 1 // If defined, enable Arduino OTA code. If set to 0 enable Arduino OTA code, if set to 1 enable ESP8266HTTPUpdateServer OTA code.
|
||||
#define ENABLE_MQTT 1 // If defined use MQTT OR AMQTT, if set to 0 enable MQTT client code, see: https://github.com/toblum/McLighting/wiki/MQTT-API, if set to 1, enable Async MQTT code, see: https://github.com/marvinroger/async-mqtt-client
|
||||
//#define ENABLE_MQTT_HOSTNAME_CHIPID // Uncomment/comment to add ESPChipID to end of MQTT hostname
|
||||
//#define ENABLE_MQTT_INCLUDE_IP // uncomment/comment to add the IP-adress to the MQTT message
|
||||
#define ENABLE_HOMEASSISTANT // If defined, enable Homeassistant integration, ENABLE_MQTT must be active
|
||||
#define MQTT_HOME_ASSISTANT_SUPPORT // If defined, use AMQTT and select Tools -> IwIP Variant -> Higher Bandwidth
|
||||
#define DELAY_MQTT_HA_MESSAGE 5 // HA Status is send after DELAY_MQTT_HA_MESSAGE seconds, to save bandwith
|
||||
|
||||
//#define ENABLE_BUTTON 14 // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control, the value defines the input pin (14 / D5) for switching the LED strip on / off, connect this PIN to ground to trigger button.
|
||||
//#define ENABLE_BUTTON_GY33 12 // If defined, enable button handling code for GY-33 color sensor to scan color. The value defines the input pin (12 / D6) for read color data with RGB sensor, connect this PIN to ground to trigger button.
|
||||
//#define POWER_SUPPLY 12 // PIN (12 / D6) If defined, enable output to control external power supply
|
||||
#if defined(POWER_SUPPLY)
|
||||
#define POWER_ON HIGH // Define the output state to turn on the power supply, either HIGH or LOW. Opposite will be uses for power off.
|
||||
#endif
|
||||
//#define ENABLE_REMOTE 13 // If defined, enable Remote Control via TSOP31238. The value defines the input pin (13 / D7) for TSOP31238 Out
|
||||
|
||||
#if defined(ENABLE_BUTTON_GY33)
|
||||
#define GAMMA 2.5 // Gamma correction for GY-33 sensor
|
||||
#endif
|
||||
|
||||
#define ENABLE_STATE_SAVE // If defined, load saved state on reboot and save state on SPIFFS
|
||||
|
||||
#define CUSTOM_WS2812FX_ANIMATIONS // uncomment and put animations in "custom_ws2812fx_animations.h"
|
||||
#define USE_HTML_MIN_GZ // uncomment for using index.htm & edit.htm from PROGMEM instead of SPIFFS
|
||||
|
||||
#define TRANS_COLOR_DELAY 5 // Delay for color transition
|
||||
#define TRANS_DELAY 10 // Delay for brightness and speed transition
|
||||
|
||||
// Experimental: Enable transitions of color, brightness and speed. It does not work properly for all effects.
|
||||
bool transEffectOverride = false;
|
||||
uint8_t trans_cnt = 0;
|
||||
int trans_cnt_max = 0;
|
||||
unsigned long colorFadeDelay = 0;
|
||||
unsigned long brightnessFadeDelay = 0;
|
||||
unsigned long speedFadeDelay = 0;
|
||||
|
||||
#if defined(CUSTOM_WS2812FX_ANIMATIONS)
|
||||
#define MULTICAST false
|
||||
#define START_UNIVERSE 1 // First DMX Universe to listen for
|
||||
uint8_t END_UNIVERSE = START_UNIVERSE; // Total number of Universes to listen for, starting at UNIVERSE
|
||||
|
||||
#endif
|
||||
uint8_t prevsegment = 0;
|
||||
|
||||
#if defined(ENABLE_REMOTE)
|
||||
uint8_t selected_color = 1;
|
||||
uint64_t last_remote_cmd;
|
||||
enum RMT_BTN {ON_OFF, MODE_UP, MODE_DOWN, RED_UP, RED_DOWN, GREEN_UP, GREEN_DOWN, BLUE_UP, BLUE_DOWN, WHITE_UP, WHITE_DOWN, BRIGHTNESS_UP, BRIGHTNESS_DOWN, SPEED_UP, SPEED_DOWN, COL_M, COL_B, COL_X, AUTOMODE, CUST_1, CUST_2, CUST_3, SEG_UP, SEG_DOWN, REPEATCMD, BTN_CNT};
|
||||
// Change your IR Commands here. You can see them in console, after you pressed a button on the remote
|
||||
uint64_t rmt_commands[BTN_CNT] = {0xF7C03F, 0xF7708F, 0xF7F00F, 0xF720DF, 0xF710EF, 0xF7A05F, 0xF7906F, 0xF7609F, 0xF750AF, 0xF7E01F, 0xF7D02F, 0xF730CF, 0xF7B04F, 0xF748B7, 0xF7C837, 0xF700FF, 0xF7807F, 0xF740BF, 0xF708F7, 0xF78877, 0xF728D7, 0xF7A857, 0xF76897, 0xF7E817, 0xFFFFFFFFFFFFFFFF};
|
||||
#endif
|
||||
#define WIFIMGR_PORTAL_TIMEOUT 180
|
||||
//#define WIFIMGR_SET_MANUAL_IP
|
||||
|
||||
#if defined(WIFIMGR_SET_MANUAL_IP)
|
||||
uint8_t _ip[4] = {192,168,0,128};
|
||||
uint8_t _gw[4] = {192,168,0,1};
|
||||
uint8_t _sn[4] = {255,255,255,0};
|
||||
#endif
|
||||
|
||||
#if defined(MQTT_HOME_ASSISTANT_SUPPORT)
|
||||
#define MQTT_HOME_ASSISTANT_0_87_SUPPORT // Comment if using HA version < 0.87
|
||||
#endif
|
||||
|
||||
#if defined(USE_WS2812FX_DMA) && (USE_WS2812FX_DMA < 0 || USE_WS2812FX_DMA > 2)
|
||||
#error "Definition of USE_WS2812FX_DMA is wrong!"
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_MQTT) and ENABLE_MQTT < 0 and ENABLE_MQTT > 1
|
||||
#error "Definition of ENABLE_MQTT is wrong!"
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_MQTT) and ENABLE_MQTT < 0 and ENABLE_MQTT > 1
|
||||
#error "Definition of ENABLE_MQTT is wrong!"
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_HOMEASSISTANT) and !defined(ENABLE_MQTT)
|
||||
#error "To use HA, you have to either enable PubCubClient or AsyncMQTT"
|
||||
#endif
|
||||
#if !defined(ENABLE_HOMEASSISTANT) and defined(MQTT_HOME_ASSISTANT_SUPPORT)
|
||||
#error "To use HA support, you have to either enable Homeassistant component"
|
||||
#endif
|
||||
|
||||
// parameters for automatically cycling favorite patterns
|
||||
uint32_t autoParams[][6] = { // main_color, back_color, xtra_color, speed, mode, duration (milliseconds)
|
||||
{0x00ff0000, 0x0000ff00, 0x00000000, 200, 1, 5000}, // blink red/geen for 5 seconds
|
||||
{0x0000ff00, 0x000000ff, 0x00000000, 180, 3, 10000}, // wipe green/blue for 10 seconds
|
||||
{0x000000ff, 0x00ff0000, 0x00000000, 100, 14, 10000}, // dual scan blue on red for 10 seconds
|
||||
{0x000000ff, 0x00ff0000, 0x00000000, 100, 45, 15000}, // fireworks blue/red for 15 seconds
|
||||
{0x00ff0000, 0x0000ff00, 0x000000ff, 40, 54, 15000} // tricolor chase red/green/blue for 15 seconds
|
||||
};
|
||||
|
||||
#if defined(ENABLE_MQTT)
|
||||
char mqtt_buf[80];
|
||||
char mqtt_will_topic[sizeof(HOSTNAME) + 7]; // Topic 'will' will be:HOSTNAME "/status";
|
||||
const char mqtt_will_payload[] = "OFFLINE";
|
||||
char mqtt_intopic[sizeof(HOSTNAME) + 3]; // Topic 'in' will be: <HOSTNAME>/in
|
||||
char mqtt_outtopic[sizeof(HOSTNAME) + 4]; // Topic 'out' will be: <HOSTNAME>/out
|
||||
bool mqtt_lwt_boot_flag = true;
|
||||
#if ENABLE_MQTT == 0
|
||||
#define MQTT_MAX_PACKET_SIZE 512
|
||||
#define MQTT_MAX_RECONNECT_TRIES 4
|
||||
uint8_t mqtt_reconnect_retries = 0;
|
||||
uint8_t qossub = 0; // PubSubClient can sub qos 0 or 1
|
||||
#endif
|
||||
|
||||
#if ENABLE_MQTT == 1
|
||||
uint8_t qossub = 0; // AMQTT can sub qos 0 or 1 or 2
|
||||
uint8_t qospub = 0; // AMQTT can pub qos 0 or 1 or 2
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_HOMEASSISTANT)
|
||||
char mqtt_ha_config[20 + sizeof(HOSTNAME) + 7]; // Topic config will be: "homeassistant/light/<HOSTNAME>/config"
|
||||
char mqtt_ha_state_in[5 + sizeof(HOSTNAME) + 12]; // Topic in will be: "home/<HOSTNAME>_ha/state/in"
|
||||
char mqtt_ha_state_out[5 + sizeof(HOSTNAME) + 13]; // Topic in will be: "home/<HOSTNAME>_ha/state/out"
|
||||
const char* on_cmd = "ON";
|
||||
const char* off_cmd = "OFF";
|
||||
bool new_ha_mqtt_msg = false;
|
||||
uint16_t color_temp = 327; // min is 154 and max is 500
|
||||
#endif
|
||||
|
||||
char mqtt_clientid[sizeof(HOSTNAME) + 9];
|
||||
char mqtt_host[65] = ""; //is configurable just for the start
|
||||
uint16_t mqtt_port = 1883; //is configurable just for the start
|
||||
char mqtt_user[33] = ""; //is configurable just for the start
|
||||
char mqtt_pass[33] = ""; //is configurable just for the start
|
||||
#endif
|
||||
|
||||
|
||||
// ***************************************************************************
|
||||
// Global variables / definitions
|
||||
// ***************************************************************************
|
||||
#define DBG_OUTPUT_PORT Serial // Set debug output port
|
||||
|
||||
uint8_t autoCount[10] = {}; // Global variable for storing the counter for automated playback for each segment
|
||||
unsigned long autoDelay[10] = {}; // Global variable for storing the time to next auto effect for each segment
|
||||
struct {
|
||||
uint16_t start = 0;
|
||||
uint16_t stop = NUMLEDS - 1;
|
||||
uint8_t mode[10] = {}; // Global variable for storing the WS2812FX mode to set for each segment
|
||||
uint8_t speed[10] = {}; // Global variable for storing the speed for effects --> smaller == slower
|
||||
uint32_t colors[10][3] = {}; // 2 dim. Color array for setting colors of WS2812FX
|
||||
uint8_t options = FX_OPTIONS;
|
||||
} segState;
|
||||
|
||||
// List of all color modes
|
||||
enum MODE {OFF, HOLD, SET};
|
||||
MODE prevmode = HOLD; // Do not change
|
||||
|
||||
struct {
|
||||
uint8_t segment = 0; // Actual selected segment
|
||||
MODE mode = SET; // Standard mode that is active when software starts
|
||||
uint8_t brightness = 196; // Global variable for storing the brightness (255 == 100%)
|
||||
} State;
|
||||
|
||||
struct {
|
||||
uint8_t segments = 1;
|
||||
uint16_t stripSize = NUMLEDS;
|
||||
char RGBOrder[5] = RGBORDER;
|
||||
#if defined(USE_WS2812FX_DMA)
|
||||
#if USE_WS2812FX_DMA == 0
|
||||
uint8_t pin = 3;
|
||||
#endif
|
||||
#if USE_WS2812FX_DMA == 1
|
||||
uint8_t pin = 1;
|
||||
#endif
|
||||
#if USE_WS2812FX_DMA == 2
|
||||
uint8_t pin = 2;
|
||||
#endif
|
||||
#else
|
||||
uint8_t pin = LED_PIN;
|
||||
#endif
|
||||
bool transEffect = false;
|
||||
} Config;
|
||||
|
||||
uint8_t fx_speed = 196; // Global variable for storing the speed for effects while fading --> smaller == slower
|
||||
uint8_t fx_mode = 0;
|
||||
uint8_t brightness_trans = 0; // Global variable for storing the brightness before change
|
||||
uint32_t hexcolors_trans[3] = {}; // Color array of colors of WS2812FX before fading
|
||||
struct ledstate // Data structure to store a state of a single led
|
||||
{
|
||||
uint8_t red;
|
||||
uint8_t green;
|
||||
uint8_t blue;
|
||||
uint8_t white;
|
||||
};
|
||||
|
||||
typedef struct ledstate LEDState; // Define the datatype LEDState
|
||||
uint8_t* ledstates; // Set a pointer to get an array of led states to store the state of the whole strip
|
||||
LEDState main_color = { 255, 0, 0, 0 }; // Store the "main color" of the strip used in single color modes
|
||||
LEDState back_color = { 0, 0, 0, 0 }; // Store the "2nd color" of the strip used in single color modes
|
||||
LEDState xtra_color = { 0, 0, 0, 0 }; // Store the "3rd color" of the strip used in single color modes
|
||||
|
||||
bool updateConfig = false; // For WiFiManger custom config and config
|
||||
|
||||
// Button handling
|
||||
|
||||
#if defined(ENABLE_BUTTON) || defined(ENABLE_BUTTON_GY33)
|
||||
const unsigned long keySampleIntervalMs = 25;
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_BUTTON)
|
||||
//#define BTN_MODE_SHORT "STA|mo|fxm| s| b| r1| g1| b1| w1| r2| g2| b2| w2| r3| g3| b3| w3" // Example
|
||||
#define BTN_MODE_SHORT "STA| 5| 0|196|255| 0| 0| 0|255| 0| 0| 0| 0| 0| 0| 0| 0" // Static white
|
||||
#define BTN_MODE_MEDIUM "STA| 5| 48|196|200|255|102| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0" // Fire flicker
|
||||
#define BTN_MODE_LONG "STA| 5| 46|196|200|255|102| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0" // Fireworks random
|
||||
unsigned long keyPrevMillis = 0;
|
||||
byte longKeyPressCountMax = 80; // 80 * 25 = 2000 ms
|
||||
byte mediumKeyPressCountMin = 20; // 20 * 25 = 500 ms
|
||||
byte KeyPressCount = 0;
|
||||
byte prevKeyState = HIGH; // button is active low
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_BUTTON_GY33)
|
||||
unsigned long keyPrevMillis_gy33 = 0;
|
||||
byte longKeyPressCountMax_gy33 = 80; // 80 * 25 = 2000 ms
|
||||
byte mediumKeyPressCountMin_gy33 = 20; // 20 * 25 = 500 ms
|
||||
byte KeyPressCount_gy33 = 0;
|
||||
byte prevKeyState_gy33 = HIGH; // button is active low
|
||||
#endif
|
||||
#define USE_WS2812FX_DMA 0 // 0 = Used PIN is ignored & set to RX/GPIO3; 1 = Used PIN is ignored & set to TX/GPIO1; 2 = Used PIN is ignored & set to D4/GPIO2; Uses WS2812FX, see: https://github.com/kitesurfer1404/WS2812FX
|
||||
// or comment it out
|
||||
#if defined(USE_WS2812FX_DMA)
|
||||
#define MAXLEDS 384 // due to memory limit of esp8266 at the moment only 384 leds are supported in DMA Mode. More can crash if mqtt is used.
|
||||
#else
|
||||
#define MAXLEDS 4096
|
||||
#endif
|
||||
// Neopixel
|
||||
#define LED_PIN 3 // PIN (15 / D8) where neopixel / WS2811 strip is attached; is configurable, if USE_WS2812FX_DMA is not defined. Just for the start
|
||||
#define NUMLEDS 50 // Number of leds in the; is configurable just for the start
|
||||
#define RGBORDER "GRBW" // RGBOrder; is configurable just for the start
|
||||
#define FX_OPTIONS 48 // ws2812fx Options 48 = SIZE_SMALL + FADE_MEDIUM is configurable just for the start; for WS2812FX setSegment OPTIONS, see: https://github.com/kitesurfer1404/WS2812FX/blob/master/extras/WS2812FX%20Users%20Guide.md
|
||||
//#define LED_TYPE_WS2811 // Uncomment, if LED type uses 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
|
||||
#define LED_BUILTIN 2 // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192
|
||||
char HOSTNAME[65] = "McLightingRGBW"; // Friedly hostname is configurable just for the start. Hostname should not contain spaces as this can break Home Assistant discovery if used.
|
||||
|
||||
#define ENABLE_OTA 1 // If defined, enable Arduino OTA code. If set to 0 enable Arduino OTA code, if set to 1 enable ESP8266HTTPUpdateServer OTA code.
|
||||
#define ENABLE_MQTT 1 // If defined use MQTT OR AMQTT, if set to 0 enable MQTT client code, see: https://github.com/toblum/McLighting/wiki/MQTT-API, if set to 1, enable Async MQTT code, see: https://github.com/marvinroger/async-mqtt-client
|
||||
//#define ENABLE_MQTT_HOSTNAME_CHIPID // Uncomment/comment to add ESPChipID to end of MQTT hostname
|
||||
//#define ENABLE_MQTT_INCLUDE_IP // uncomment/comment to add the IP-adress to the MQTT message
|
||||
#define ENABLE_HOMEASSISTANT // If defined, enable Homeassistant integration, ENABLE_MQTT must be active
|
||||
#define MQTT_HOME_ASSISTANT_SUPPORT // If defined, use AMQTT and select Tools -> IwIP Variant -> Higher Bandwidth
|
||||
#define DELAY_MQTT_HA_MESSAGE 5 // HA Status is send after DELAY_MQTT_HA_MESSAGE seconds, to save bandwith
|
||||
|
||||
//#define ENABLE_BUTTON 14 // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control, the value defines the input pin (14 / D5) for switching the LED strip on / off, connect this PIN to ground to trigger button.
|
||||
//#define ENABLE_BUTTON_GY33 12 // If defined, enable button handling code for GY-33 color sensor to scan color. The value defines the input pin (12 / D6) for read color data with RGB sensor, connect this PIN to ground to trigger button.
|
||||
//#define POWER_SUPPLY 12 // PIN (12 / D6) If defined, enable output to control external power supply
|
||||
#if defined(POWER_SUPPLY)
|
||||
#define POWER_ON HIGH // Define the output state to turn on the power supply, either HIGH or LOW. Opposite will be uses for power off.
|
||||
#endif
|
||||
#define ENABLE_REMOTE 13 // If defined, enable Remote Control via TSOP31238. The value defines the input pin (13 / D7) for TSOP31238 Out
|
||||
|
||||
#if defined(ENABLE_BUTTON_GY33)
|
||||
#define GAMMA 2.5 // Gamma correction for GY-33 sensor
|
||||
#endif
|
||||
|
||||
#define ENABLE_STATE_SAVE // If defined, load saved state on reboot and save state on SPIFFS
|
||||
|
||||
#define CUSTOM_WS2812FX_ANIMATIONS // uncomment and put animations in "custom_ws2812fx_animations.h"
|
||||
#define USE_HTML_MIN_GZ // uncomment for using index.htm & edit.htm from PROGMEM instead of SPIFFS
|
||||
|
||||
#define TRANS_COLOR_DELAY 5 // Delay for color transition
|
||||
#define TRANS_DELAY 10 // Delay for brightness and speed transition
|
||||
|
||||
// Experimental: Enable transitions of color, brightness and speed. It does not work properly for all effects.
|
||||
bool transEffectOverride = false;
|
||||
uint8_t trans_cnt = 0;
|
||||
int trans_cnt_max = 0;
|
||||
unsigned long colorFadeDelay = 0;
|
||||
unsigned long brightnessFadeDelay = 0;
|
||||
unsigned long speedFadeDelay = 0;
|
||||
|
||||
#if defined(CUSTOM_WS2812FX_ANIMATIONS)
|
||||
#define MULTICAST false
|
||||
#define START_UNIVERSE 1 // First DMX Universe to listen for
|
||||
uint8_t END_UNIVERSE = START_UNIVERSE; // Total number of Universes to listen for, starting at UNIVERSE
|
||||
|
||||
#endif
|
||||
uint8_t prevsegment = 0;
|
||||
|
||||
#if defined(ENABLE_REMOTE)
|
||||
uint8_t selected_color = 1;
|
||||
uint64_t last_remote_cmd;
|
||||
enum RMT_BTN {ON_OFF, MODE_UP, MODE_DOWN, RED_UP, RED_DOWN, GREEN_UP, GREEN_DOWN, BLUE_UP, BLUE_DOWN, WHITE_UP, WHITE_DOWN, BRIGHTNESS_UP, BRIGHTNESS_DOWN, SPEED_UP, SPEED_DOWN, COL_M, COL_B, COL_X, AUTOMODE, CUST_1, CUST_2, CUST_3, SEG_UP, SEG_DOWN, REPEATCMD, BTN_CNT};
|
||||
// Change your IR Commands here. You can see them in console, after you pressed a button on the remote
|
||||
uint64_t rmt_commands[BTN_CNT] = {0xF7C03F, 0xF7708F, 0xF7F00F, 0xF720DF, 0xF710EF, 0xF7A05F, 0xF7906F, 0xF7609F, 0xF750AF, 0xF7E01F, 0xF7D02F, 0xF730CF, 0xF7B04F, 0xF748B7, 0xF7C837, 0xF700FF, 0xF7807F, 0xF740BF, 0xF708F7, 0xF78877, 0xF728D7, 0xF7A857, 0xF76897, 0xF7E817, 0xFFFFFFFFFFFFFFFF};
|
||||
#endif
|
||||
#define WIFIMGR_PORTAL_TIMEOUT 180
|
||||
//#define WIFIMGR_SET_MANUAL_IP
|
||||
|
||||
#if defined(WIFIMGR_SET_MANUAL_IP)
|
||||
uint8_t _ip[4] = {192,168,0,128};
|
||||
uint8_t _gw[4] = {192,168,0,1};
|
||||
uint8_t _sn[4] = {255,255,255,0};
|
||||
#endif
|
||||
|
||||
#if defined(MQTT_HOME_ASSISTANT_SUPPORT)
|
||||
#define MQTT_HOME_ASSISTANT_0_87_SUPPORT // Comment if using HA version < 0.87
|
||||
#endif
|
||||
|
||||
#if defined(USE_WS2812FX_DMA) && (USE_WS2812FX_DMA < 0 || USE_WS2812FX_DMA > 2)
|
||||
#error "Definition of USE_WS2812FX_DMA is wrong!"
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_MQTT) and ENABLE_MQTT < 0 and ENABLE_MQTT > 1
|
||||
#error "Definition of ENABLE_MQTT is wrong!"
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_MQTT) and ENABLE_MQTT < 0 and ENABLE_MQTT > 1
|
||||
#error "Definition of ENABLE_MQTT is wrong!"
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_HOMEASSISTANT) and !defined(ENABLE_MQTT)
|
||||
#error "To use HA, you have to either enable PubCubClient or AsyncMQTT"
|
||||
#endif
|
||||
#if !defined(ENABLE_HOMEASSISTANT) and defined(MQTT_HOME_ASSISTANT_SUPPORT)
|
||||
#error "To use HA support, you have to either enable Homeassistant component"
|
||||
#endif
|
||||
|
||||
// parameters for automatically cycling favorite patterns
|
||||
uint32_t autoParams[][6] = { // main_color, back_color, xtra_color, speed, mode, duration (milliseconds)
|
||||
{0x00ff0000, 0x0000ff00, 0x00000000, 200, 1, 5000}, // blink red/geen for 5 seconds
|
||||
{0x0000ff00, 0x000000ff, 0x00000000, 180, 3, 10000}, // wipe green/blue for 10 seconds
|
||||
{0x000000ff, 0x00ff0000, 0x00000000, 100, 14, 10000}, // dual scan blue on red for 10 seconds
|
||||
{0x000000ff, 0x00ff0000, 0x00000000, 100, 45, 15000}, // fireworks blue/red for 15 seconds
|
||||
{0x00ff0000, 0x0000ff00, 0x000000ff, 40, 54, 15000} // tricolor chase red/green/blue for 15 seconds
|
||||
};
|
||||
|
||||
#if defined(ENABLE_MQTT)
|
||||
char mqtt_buf[80];
|
||||
char mqtt_will_topic[sizeof(HOSTNAME) + 7]; // Topic 'will' will be:HOSTNAME "/status";
|
||||
const char mqtt_will_payload[] = "OFFLINE";
|
||||
char mqtt_intopic[sizeof(HOSTNAME) + 3]; // Topic 'in' will be: <HOSTNAME>/in
|
||||
char mqtt_outtopic[sizeof(HOSTNAME) + 4]; // Topic 'out' will be: <HOSTNAME>/out
|
||||
bool mqtt_lwt_boot_flag = true;
|
||||
#if ENABLE_MQTT == 0
|
||||
#define MQTT_MAX_PACKET_SIZE 512
|
||||
#define MQTT_MAX_RECONNECT_TRIES 4
|
||||
uint8_t mqtt_reconnect_retries = 0;
|
||||
uint8_t qossub = 0; // PubSubClient can sub qos 0 or 1
|
||||
#endif
|
||||
|
||||
#if ENABLE_MQTT == 1
|
||||
uint8_t qossub = 0; // AMQTT can sub qos 0 or 1 or 2
|
||||
uint8_t qospub = 0; // AMQTT can pub qos 0 or 1 or 2
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_HOMEASSISTANT)
|
||||
char mqtt_ha_config[20 + sizeof(HOSTNAME) + 7]; // Topic config will be: "homeassistant/light/<HOSTNAME>/config"
|
||||
char mqtt_ha_state_in[5 + sizeof(HOSTNAME) + 12]; // Topic in will be: "home/<HOSTNAME>_ha/state/in"
|
||||
char mqtt_ha_state_out[5 + sizeof(HOSTNAME) + 13]; // Topic in will be: "home/<HOSTNAME>_ha/state/out"
|
||||
const char* on_cmd = "ON";
|
||||
const char* off_cmd = "OFF";
|
||||
bool new_ha_mqtt_msg = false;
|
||||
uint16_t color_temp = 327; // min is 154 and max is 500
|
||||
#endif
|
||||
|
||||
char mqtt_clientid[sizeof(HOSTNAME) + 9];
|
||||
char mqtt_host[65] = ""; //is configurable just for the start
|
||||
uint16_t mqtt_port = 1883; //is configurable just for the start
|
||||
char mqtt_user[33] = ""; //is configurable just for the start
|
||||
char mqtt_pass[33] = ""; //is configurable just for the start
|
||||
#endif
|
||||
|
||||
|
||||
// ***************************************************************************
|
||||
// Global variables / definitions
|
||||
// ***************************************************************************
|
||||
#define DBG_OUTPUT_PORT Serial // Set debug output port
|
||||
|
||||
uint8_t autoCount[10] = {}; // Global variable for storing the counter for automated playback for each segment
|
||||
unsigned long autoDelay[10] = {}; // Global variable for storing the time to next auto effect for each segment
|
||||
struct {
|
||||
uint16_t start = 0;
|
||||
uint16_t stop = NUMLEDS - 1;
|
||||
uint8_t mode[10] = {}; // Global variable for storing the WS2812FX mode to set for each segment
|
||||
uint8_t speed[10] = {}; // Global variable for storing the speed for effects --> smaller == slower
|
||||
uint32_t colors[10][3] = {}; // 2 dim. Color array for setting colors of WS2812FX
|
||||
uint8_t options = FX_OPTIONS;
|
||||
} segState;
|
||||
|
||||
// List of all color modes
|
||||
enum MODE {OFF, HOLD, SET};
|
||||
MODE prevmode = HOLD; // Do not change
|
||||
|
||||
struct {
|
||||
uint8_t segment = 0; // Actual selected segment
|
||||
MODE mode = SET; // Standard mode that is active when software starts
|
||||
uint8_t brightness = 196; // Global variable for storing the brightness (255 == 100%)
|
||||
} State;
|
||||
|
||||
struct {
|
||||
uint8_t segments = 1;
|
||||
uint16_t stripSize = NUMLEDS;
|
||||
char RGBOrder[5] = RGBORDER;
|
||||
#if defined(USE_WS2812FX_DMA)
|
||||
#if USE_WS2812FX_DMA == 0
|
||||
uint8_t pin = 3;
|
||||
#endif
|
||||
#if USE_WS2812FX_DMA == 1
|
||||
uint8_t pin = 1;
|
||||
#endif
|
||||
#if USE_WS2812FX_DMA == 2
|
||||
uint8_t pin = 2;
|
||||
#endif
|
||||
#else
|
||||
uint8_t pin = LED_PIN;
|
||||
#endif
|
||||
bool transEffect = false;
|
||||
} Config;
|
||||
|
||||
uint8_t fx_speed = 196; // Global variable for storing the speed for effects while fading --> smaller == slower
|
||||
uint8_t fx_mode = 0;
|
||||
uint8_t brightness_trans = 0; // Global variable for storing the brightness before change
|
||||
uint32_t hexcolors_trans[3] = {}; // Color array of colors of WS2812FX before fading
|
||||
struct ledstate // Data structure to store a state of a single led
|
||||
{
|
||||
uint8_t red;
|
||||
uint8_t green;
|
||||
uint8_t blue;
|
||||
uint8_t white;
|
||||
};
|
||||
|
||||
typedef struct ledstate LEDState; // Define the datatype LEDState
|
||||
uint8_t* ledstates; // Set a pointer to get an array of led states to store the state of the whole strip
|
||||
LEDState main_color = { 255, 0, 0, 0 }; // Store the "main color" of the strip used in single color modes
|
||||
LEDState back_color = { 0, 0, 0, 0 }; // Store the "2nd color" of the strip used in single color modes
|
||||
LEDState xtra_color = { 0, 0, 0, 0 }; // Store the "3rd color" of the strip used in single color modes
|
||||
|
||||
bool updateConfig = false; // For WiFiManger custom config and config
|
||||
|
||||
// Button handling
|
||||
|
||||
#if defined(ENABLE_BUTTON) || defined(ENABLE_BUTTON_GY33)
|
||||
const unsigned long keySampleIntervalMs = 25;
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_BUTTON)
|
||||
//#define BTN_MODE_SHORT "STA|mo|fxm| s| b| r1| g1| b1| w1| r2| g2| b2| w2| r3| g3| b3| w3" // Example
|
||||
#define BTN_MODE_SHORT "STA| 5| 0|196|255| 0| 0| 0|255| 0| 0| 0| 0| 0| 0| 0| 0" // Static white
|
||||
#define BTN_MODE_MEDIUM "STA| 5| 48|196|200|255|102| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0" // Fire flicker
|
||||
#define BTN_MODE_LONG "STA| 5| 46|196|200|255|102| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0" // Fireworks random
|
||||
unsigned long keyPrevMillis = 0;
|
||||
byte longKeyPressCountMax = 80; // 80 * 25 = 2000 ms
|
||||
byte mediumKeyPressCountMin = 20; // 20 * 25 = 500 ms
|
||||
byte KeyPressCount = 0;
|
||||
byte prevKeyState = HIGH; // button is active low
|
||||
#endif
|
||||
|
||||
#if defined(ENABLE_BUTTON_GY33)
|
||||
unsigned long keyPrevMillis_gy33 = 0;
|
||||
byte longKeyPressCountMax_gy33 = 80; // 80 * 25 = 2000 ms
|
||||
byte mediumKeyPressCountMin_gy33 = 20; // 20 * 25 = 500 ms
|
||||
byte KeyPressCount_gy33 = 0;
|
||||
byte prevKeyState_gy33 = HIGH; // button is active low
|
||||
#endif
|
||||
|
||||
@@ -1 +1 @@
|
||||
#define SKETCH_VERSION "3.1.1"
|
||||
#define SKETCH_VERSION "3.1.1"
|
||||
@@ -261,4 +261,4 @@
|
||||
* 18 April 2020
|
||||
* Version Bump to 3.1.1
|
||||
* bugfixes regarding issue #80
|
||||
*/
|
||||
*/
|
||||
Reference in New Issue
Block a user